A pg. 12, Connecting to an analog component, Connecting to a digital component – JVC TH-M42 User Manual
Page 15: Getting started

Getting started
12
Connecting to an analog component
You can enjoy the sound of an analog component such as a VCR, TV, or Cassette recorder with this system. Use RCA pin plug cords (not
supplied) for connection.
NOTE
• The signals input to the VIDEO jack of the VCR IN jacks will be output only from the VIDEO jack of the VIDEO OUT jacks, not from the S-VIDEO
jack of the VIDEO OUT jacks.
Connecting to a digital component
You can enjoy the sound of a digital component such as a DBS (Direct Broadcast Satellite) tuner or MD recorder with this system. Use digital
optical cord (not supplied) for connection.
NOTE
• Only digital audio signals can be input when selecting “DBS” as the source to play. (
A pg. 18) When connecting a video component such as a DBS
tuner, operate this system to listen to the sound.
RCA pin plug cord
(not supplied)
Center unit
VCR
Composite video cord
(not supplied)
A To composite video output
B To S-video output
C To audio output
A
B
C
S-video cord
(not supplied)
Red
White
C
C
or
TV
Cassette recorder
DBS tuner
Before connecting a digital
optical cord, unplug the
protective plug.
Center unit
Digital optical cord
(not supplied)
To digital optical output
MD recorder
TH-M42[J].book Page 12 Wednesday, April 23, 2003 5:58 PM