JVC XU-301BK - Manual (Page 52)

50
English
Connections
Accessory connecting cords
The COMPU LINK functions provided with JVC’s products
come in the form of COMPU LINK-3 or COMPU LINK-1.
They are compatible, and the difference between them is that
COMPU LINK-3 has the functions of COMPU LINK-1 and
some additional functions as well.
• Synchro recording
With this function, recording starts automatically in synchroni-
zation with the start of the source playback.
How to identify the type of
COMPU LINK function provided
The type of function is marked above the
connector on the rear panel of the product.
For instance, a product with the COMPU
LINK-3 SYNCHRO marking supports the
COMPU LINK-3 function.
COMPU LINK Function
Operation To perform
• Synchro recording
Source component Recording component
Example: CD player \ MD-CD combination deck
1 Place the CD inside the CD player.
• Program the tracks if they are to be recorded in a pro-
grammed sequence.
2 Place the recording MD in the MD-CD
combination deck.
3 Press the DIGITAL button (with digital
connections).
• Press the LINE button when analog connections have been
performed.
4 Press the REC PAUSE button.
• Always proceed to operate from the stop mode.
5 Press the PLAY button on the CD player.
• The CD play and MD-CD combination deck recording now
start automatically.
COMPU LINK-3
SYNCHRO
Amplifier CD player
XU-301BK MD-
CD combination
deck
• CD player Synchro recording
XU-301BK MD-CD
combination deck
• What is COMPU LINK?
The COMPU LINK remote control system (or, simply, “COMPU LINK”) serves to enable the kind of simple operations provided by an
integrated component to be conducted even though this unit is a discrete component.
These simple operations can be performed by connecting the COMPU LINK-3 SYNCHRO or COMPU LINK-1 SYNCHRO connector on
each of the components involved.
10/p50-56 (E) 4/1/98, 5:11 PM 50