Cd recording (1st track recording), 30 english, 2 select cd1 and establish the stop mode – JVC XU-301BK User Manual
Page 32: 3 insert the recording md, When md recording is completed, Insert the md with its label side facing up
30
English
•
To stop the recording at any time
Press the
7 (stop) button. The recording mode is released after “UTOC WRITING” is displayed.
There is no need to adjust the recording level (for a digital recording).
Recording is not possible while a CD or MD is playing.
When the CD REC button is pressed, the function is automatically switched to “CD.” This means
that when the CD to be recorded has been selected, recording can proceed straightaway.
Upon completion of the MD recording, “UTOC WRITING” is displayed. Operating any button while
this message is displayed may render the MD unusable.
Always wait for “UTOC WRITING” to be cleared before proceeding with the next operation.
CD Recording (1st TRACK recording)
Only the first tracks on the CDs can be recorded on the MD.
1 Insert CDs into CD1, CD2 and CD3 in the order in which their first
tracks are to be recorded.
•
Once the first track of a CD has been recorded, another track on that CD can be substituted during
recording. The substituted CD track is recorded after the last CD.
2 Select CD1 and establish the stop mode.
Example: When recording from CD1 (CD whose first track is to be recorded first)
3 Insert the recording MD.
•
Insert the MD with its label side facing up.
4 Press the 1st TRACK REC button to start recording.
•
CD play and MD recording start simultaneously. Only the first track on the CD is recorded.
•
When a CD is recorded, its digital signals are recorded in their original form. A track mark is
automatically placed where one track changes to the next, and the track number also changes.
•
When MD recording is completed
After “UTOC WRITING” is displayed, operation stops automatically. It also stops automatically
when play of the last CD finishes.
•
To stop the recording at any time
Press the
7 (stop) button.
The recording mode is released after “UTOC WRITING” is displayed.
1st TRACK
REC
DIGITAL
L
R
40 30
15 10
20
6
3
0
CD
MD
TOC REC
XU-301 MD-CD COMBINATION DECK
REC
PAUSE
REC
START
REC
DIGITAL
CD
REC SOURCE SELECTOR
LINE
MIC
STOP
MIXING
CANCEL
CD
MD
MIC
MAX
MIN
PHONES
MIX BALANCE
REC LEVEL
CD
LINE
LINE
MIC
PLAY MODE
/CHARA
DISPLAY
TITLE
EDIT
32kHz
44.1kHz
DIGITAL INPUT
48kHz
LISTENING
SKIP
1st TRACK
REC
TIMER
/CLOCK
STANDBY
CD REC
SET
2
CD
CD
3
1
CD
PLAY & EXCHANGE
3
-
CD
NORMAL SPEED
CD PITCH CONTROL
POWER
EDIT
4
2
1
3
-1
2
-2
SAMPLING RATE CONVERTER
07/p24-33 (E)
4/1/98, 4:44 PM
30