Nokia 6185 - Manual (Page 70)

63
3. Enter new security code at Enter new security
code:, press OK (must be five digits)
4. Enter new security code again at Verify new
security code:, press OK
5. Phone will display Security code changed
Note: If you have changed your security code and don’t remember
the new code, contact your service provider. Once you have
changed your security code, the default setting is no longer valid.
Send own caller ID with next call
In most service areas, when you call someone your name
will be presented to his/her caller ID (if they subscribe).
This feature allows you to block their caller ID (your
number will not be displayed) when you call them.
This feature works on a per-call basis. Contact your
service provider for more details.
Please be aware of the following:
• This feature is only effective when calling to a number that
is equipped with Caller ID.
• This feature is available only when supported by the
wireless network, and may not function if you are roaming.
Note: Before you can activate this feature, you should first store
the feature code given to you by your service provider. Otherwise,
this feature may not appear in the menu or function properly.
Check with your service provider to confirm if the feature code has
been pre-programmed for you. See “Network feature setting” on
page 48 for more details.
1. Press Menu 4-4-3 (Settings - Network services -
Send own caller ID with next call)
2. W to Yes (to show your number) or No (to not show
it) and press OK
3. Enter the number you wish to call (or press Search
to retrieve the number from the phone book and
press OK), then press OK
4. Your phone will attempt to call this number with the
feature code you stored in Menu 4-4-4 (
see “Network
feature setting” on page 48 )