Nokia 6185 - Manual (Page 51)

44
Lock code
You’ll need the lock code to activate and deactivate
Phone Lock (
see page 53 ), or to change your lock code.
The default lock code is 1234. If you enter an incorrect
lock code five times in a row,
your phone will prompt you
for the security code ( see page 62 ).
Changing your lock code
In a lock code, only numeric characters are accepted.
1. Enter Menu 4-3-2-3 (Settings - Security settings -
Access codes - Change lock code)
2. Enter lock code at Enter lock code: and press OK
3. Enter new lock code, press OK
4. Verify new lock code, press OK
Note: When you change your lock code, make sure you store it in a
safe place, away from your phone. Avoid entering access codes
similar to emergency numbers to prevent accidental emergency
calls.
Manual touch tones
This setting determines how long touch tones are
produced as you press the keys on the keypad. Note that
touch tones are sometimes called DTMF tones.
See “Touch tone length” on page 70 for details.
Setting manual touch tones
Press Menu 4-2-3-1 (Settings - Phone settings - Touch
tones - Manual touch tones) and highlight one of the
following options, then press OK.
Continuous means the tone sounds for as long as
you press and hold the key.
Fixed sets the tone length to .1 second, regardless
of how long you press the key.
Off turns the tones off, and no tones will be sent
when you press the keys.