Nokia 6185 - Manual (Page 35)

28
*These calling cards are frequently used with these dialing
sequences. However, they may vary and are subject to change at
the phone company’s discretion.
Note: The order of the steps to follow may vary, depending on
which dialing sequence your card uses.
6. Enter access number when prompted for the calling
card’s access number (usually the 1-800 number
listed on the back of the calling card), press OK
Note: You can also retrieve the access number from your phone
book if it has already been stored. Simply press
Search , then W or
V to find the number.
7. Enter card number and/or PIN when prompted to
enter calling card number and personal identification
number, then press OK. Press OK again at Save
changes?
8. Press W or V to display Card name and press Select.
Enter card name using your phone’s keypad, then
press OK.
See “Entering text and numbers” on page 36 if you need help on
entering the card name
Choosing a calling card to use
1. Press Menu 4-1-3 (Settings - Call settings - Calling
card)
2. Press W or V to desired card, press Options
If you use a
calling card from: *
You typically are required to:
Select this
dialing
sequence:
MCI, AT&T True
Choice, Sprint
Canada, Unitel Dial 1-800 access number, then
phone number, then card num-
ber (+ PIN if required) Access no.
+ phone no.
+ card no.
networkMCI,
WorldPhone MCI Dial 1-800 access number, then
card number (+ PIN if required),
then phone number Access no.
+ card no.
+ phone no.
GTE, PacBell, AT&T,
Stentor Dial the prefix (any numbers
that must precede the phone
number) and phone number
you want to dial, then card
number, (then PIN, if required) Prefix
+ phone no.
+ card no.