JVC DOME TYPE CAMERA TK-C676 - Manual (Page 35)

E-35
ENGLISH
AUTO PATROL Setup
Use the AUTO PATROL screen to set the configuration of the auto patrol function, which moves the camera between several positions
at a high speed.
Patrol positions 1-100 can be set in each of three modes (MODES 1 to 3). It is recommended that these three modes be set the
according to the day of the week or the time of day. For example: MODE 1 for nighttime and MODE 2 for daytime.
1.
Select the camera. (
☞
RM-P2580 Instruction manual)
CAMERA button → Numeric key (camera number) → ENTER button.
The picture of the selected camera is output.
2.
Display the SETUP menu on the camera.
(
☞
P. 18, steps 1 to 4 )
MENU button (3 sec.) → Select “CAMERA” with the PAN/TILT lever
→ SET button.
The camera moves to the home position.
3.
Tilt the PAN/TILT lever up or down to move the cur-
sor (>) to “AUTO PAN/PATROL TRACE” and press
the SET button.
The AUTO PAN/PATROL/TRACE menu is displayed.
4.
Move the cursor (>) to “AUTO PATROL SET” and
press the SET button.
The AUTO PATROL MODE 1 screen is displayed.
5.
Tilt the PAN/TILT lever to move the cursor (>) to the
PATROL position to be set.
• To display the next page (PATROL positions 9 to 19), press the
TELE button.
• To display the previous page, press the WIDE button.
6.
Set a patrolled position.
POSITION button → Numeric key (position number) → ENTER button.
• At the factory settings, positions PATROL 1 to 100 are set to HOME
to 99 in that order.
Even when positions between POS 64 and POS 99 are set, the auto
patrol operation skips them automatically and they are not switched.
7.
Set the length of time a camera will stay in each
position.
• Tilt the PAN/TILT lever to the left or right to set the time period.
• Available setting values: SKIP, 5s, 10s, 20s, 30s, 45s, 1min, 2min.
(Selecting “SKIP” skips that position and moves to the next position.)
• The factory setting is “10s” for all positions.
8.
Repeat steps 5 to 7 for each patrolled position.
• Set the patrolled positions and time periods of all patrol numbers
in this way.
9.
Change the auto patrol mode.
• Press the FAR or NEAR buttons to change the mode.
• After changing to a new mode, repeat steps
5 to 8 .
10.
Press the MENU button.
• The screen returns to the previous menu.
• After the above setup, auto patrol of the camera can be started by
pressing the AUTO PATROL button on the RM-P2580.
• To change the auto patrol mode after the above setup, display the
AUTO PATROL MODE screen and press the FAR or NEAR but-
tons.
• The auto patrol function can only be set from an RM-P2580. Note
that it differs to auto sequence operations available with other re-
mote control units.
AUTO PAN/PATROL/TRACE menu
A U T O P A N M O D E R E T U R N
– – – A U T O P A N / P A T R O L / T R A C E – – –
A U T O P A N S P E E D N O R M A L
A . P A N S T A R T P O S . S E T . .
A . P A N R E T U R N P O S . S E T . .
A U T O P A T R O L S E T . .
A U T O T R A C E S E T . .
R M A . P A N K E Y A . P A N
R M A . P A T R O L K E Y A . P A T R O L
AUTO PATROL MODE 1 screen
(Example showing PATROL Nos. 9 to 16)
P A T R O L 9 P O S 8 1 0 s
A U T O P A T R O L MO D E 1
P A T R O L 1 0 P O S 9 1 0 s
P A T R O L 1 1 P O S 1 0 1 0 s
P A T R O L 1 2 P O S 1 1 1 0 s
P A T R O L 1 3 P O S 1 2 1 0 s
P A T R O L 1 4 P O S 1 3 1 0 s
P A T R O L 1 5 P O S 1 4 1 0 s
P A T R O L 1 6 P O S 1 5 1 0 s
F W D / B W D / Z O O M M O D E / F O C U S
AUTO PATROL MODE 1 screen
(Example showing PATROL Nos.1 to 8)
P A T R O L 1 H OM E 1 0 s
A U T O P A T R O L MO D E 1
P A T R O L 2 P O S 1 1 0 s
P A T R O L 3 P O S 2 1 0 s
P A T R O L 4 P O S 3 1 0 s
P A T R O L 5 P O S 4 1 0 s
P A T R O L 6 P O S 5 1 0 s
P A T R O L 7 P O S 6 1 0 s
P A T R O L 8 P O S 7 1 0 s
F W D / B W D / Z O O M M O D E / F O C U S
SETUP
MENU SET
SPEED
IRIS
AF
FOCUS
ZOOM
OPEN
FAR
TELE CLEAR /HOME
7
4
1
8
0
5
2
9
6
3
ENTER
AUTO PAN
OPTION 1 OPTION 2
CAMERA POSI-
TION
AUTO PATROL
CLOSE
NEAR
WIDE
AUTO F-1 F-2 F-3
PAN/TILT LENS CAMERA/POSITION
CAMERA POSITION
REMOTE CONTROL UNIT RM-P2580
ALARM
POWER
KEY LOCK
PAN/TILT
lever
CAMERA
buttons
WIDE button
FAR button
TELE button
NEAR button
ENTER
button
SET button
MENU button
High
speed
High speed High speed
High
speed
POSITION
1
POSITION
3
POSITION
2
POSITION
4