Jensen VM8022 - Manual (Page 9)

VM8022
5
OPERATION
Power
Press the (power) button (2) to turn the unit on. Press and hold the power
button again to turn the unit off.
NOTE: LCD panels may take longer to respond when subjected to cold
temperatures for an extended period of time. In addition, the visibility
of the numbers on the LCD may decrease slightly. The LCD display
will return to normal when the temperature becomes normal.
Source
Press the SRC button (6) to select a different mode of operation, as
indicated on the display panel. Available modes include tuner (FM1, FM2,
FM3, AM1, AM2), DVD, SD, USB, and auxiliary (AUX).
Audio Mute
Press the MUTE button (21) to silence the audio volume. “
” appears on
the display. Press MUTE again to restore volume to the previous setting.
Volume Control
To increase the volume, turn the rotary encoder (5) clockwise. To decrease
the volume, turn the rotary encoder counter-clockwise. When volume is
adjusted, the volume level will be shown on the display panel as a number
ranging from “0” (lowest) to “63” (highest).
Audio Menu
Press the VOL button (5) to access the audio menu. Press the VOL button
repeatedly to move through the list of menu options.
• BASS: Turn the rotary encoder (5) to adjust the bass level from “+7” to
“-7”.
• TREBLE: Turn the rotary encoder to adjust the treble level from “+7” to
“-7”.
• BALANCE: Turn the rotary encoder to adjust the balance from “R7” (full
right) to “L7” (full left).
• FADER: Turn the rotary encoder to adjust the fader from “F7” (full front)
to “R7” (full rear).
The unit automatically exits the audio control menu after five seconds of
inactivity.
Menu Operation
Press and hold the VOL button (5) for more than two seconds to access the
menu. Press the VOL button to move through the following menu options:
EQ MODE, BEEP, 12/24 MODE (clock), VOL MODE, A-VOL,
SUBWOOFER, SUB VOL. The following procedures assume you have
already accessed the menu.
Equalizer Selector (EQ MODE)
The equalizer function applies preset sound effects to the unit’s audio
output signal. Turn the rotary encoder to select from the following equalizer
options: “OFF”, “ROCK”, “POP”, “CLASSIC” and “FLAT”. With the equalizer
function activated, if bass or treble is adjusted, the EQ Mode will revert to
OFF.
VOL
VM8022
VOL
LO/DX
LOUD
3 4 RDM
2 INT
1
5
6
SD/MMC
AS
/
RPT
20
21
23
22
18