JVC LVT1007-010A[A] User Manual
Page 48
46
To change the transmittable signals for
operating a CATV converter or DBS tuner
1. Press and hold CATV/DBS
.
2. Press CATV/DBS CONTROL.
3 Enter a manufacturer’s code using buttons 1 – 9,
and 0.
See the list on the right column to find the code.
4. Release CATV/DBS
.
The following buttons can be used for operating a CATV
converter and DBS tuner:
CATV/DBS
:
Turn on and off a CATV converter or DBS
tuner.
After pressing CATV/DBS CONTROL, you can perform the
following operations on a CATV converter or DBS tuner:
CH +/–:
Change the channels.
1 – 10/0, 0, 100+ (+10):
Select the channels.
The 10/0 button will function as the ENTER
button if your equipment requires pressing
ENTER after selecting a channel number.
5. Try to operate your CATV converter or DBS
tuner by pressing CATV/DBS
.
When your CATV converter or DBS tuner turns on or off, you
have entered the correct code.
If there are more than one code listed for your brand of
CATV converter or DBS tuner, try each one until the correct
one is entered.
Note:
You cannot preset the signals for both the CATV converter and DBS
tuner at the same time.
For CATV converter
Manufacturer
Codes
General Instrument
06, 07, 08, 09, 10, 11,
12, 13, 14, 29
Hamlin/Regal
01, 02, 03, 04, 05
Jerrold
06, 07, 08, 09, 10, 11,
12, 13, 14
Oak
15, 16, 17
Panasonic
18, 19, 20
Pioneer
21, 22
Scientific Atlanta
23, 24, 25
Tocom
26
Zenith
27, 28
Manufacturer
Codes
JVC
56
*
, 57, 67
Amstrad
43, 44, 45, 46, 47, 48, 49
Blaupunkt
30
Echostar
50, 51, 67
Goldstar
31
Grundig
32, 33
Hirshmann
48, 52, 53, 54, 55
Instrument
68
ITT/NOKIA
34
Kathrein
52, 58, 59, 60, 61, 62, 63
NEC
35, 36
Orbitech
48
Philips
37, 38
RCA
65
Samsung
39, 40
Schwaiger
61, 64
Siemens
41, 42
Sony
66
Technisat
48
For DBS tuner
*Initial setting
Manufacturers’ codes are subject to change without notice. If they
are changed, this remote control cannot operate the equipment.
40-50_7032[A]3.pm6
03.5.12, 7:02 PM
46