JVC OUTDOOR PTZ IP DOME CAMERA VN-V686WPU User Manual
Page 37
37
Exiting the JPEG Viewer
To exit, press the [close] [X] button at the top right of the window.
● During the next startup of the built-in viewer, launch the Internet Explorer and enter the URL of the built-in
viewer in the address field.
For example, if the IP address of VN-V686WPU is 192.168.0.2, enter as follows:
http://192.168.0.2/cgi-bin/v686viewing.cgi?v686monitor_j.html
● After the [Security Settings] screen appears, press the [OK] button to proceed.
D
PTZ
Open the [PTZ Controller] screen.
Configure settings for the camera manual operation, preset position
registration and Auto Pan/Auto Trace operation in the [PTZ Controller]
screen.
Note：
● When the PTZ Controller screen is first opened in the computer, ActiveX
will be installed.
T For details of [PTZ controller Operation], please refer to
[INSTRUCTIONS](pdf) in the supplied CD-ROM.
E
Setup
Displays the built-in viewer settings window.
This setting screen is used to set the built-in viewer as a software on the
computer.
Note：
● Settings on this setting screen do not affect settings of the VN-V686WPU
unit.
Click [X].
VN-V686WPU_EN.book Page 37 Tuesday, December 25, 2007 11:23 AM