Network settings, Ip address settings, Setting the ip address for vn-v686wpu – JVC OUTDOOR PTZ IP DOME CAMERA VN-V686WPU User Manual
Page 26
26
Network Settings
Setting the IP address for VN-V686WPU
There are two methods to set the IP address for
VN-V686WPU as follows.
(A) Assigning an IP address to VN-V686WPU
from the DHCP server
(B) Assigning a static IP address to VN-
V686WPU
Ⅵ (A) Assigning an IP address from the
DHCP server
● VN-V686WPU is set to ADHCP EnableB (the
DHCP client function is ON) by default. To
assign an IP address from the DHCP server,
connect the DHCP server to the LAN, set the
[IP setting] of VN-V686WPU to
ADHCPB, and
click the [OK] button. (A Page 30)
● For details on IP addresses assigned to VN-
V686WPU, consult your network administrator.
You can look up the IP address of VN-
V686WPU using the search tool in the
supplied CD-ROM.
For details, please refer to
AReadmeB file in
the CD-ROM.
Note:
● Set the DHCP server such that the same IP
address is always assigned to the MAC address
of VN-V686WPU by the DHCP server.
Connection may fail if the above setting is not
performed.
Ⅵ (B) Assigning a static IP address
ⅷ System configuration required for setting
IP address
VN-V686WPU at factory default is set to
ADHCP
Enable
B (DHCP client function is On). When it is
connected to a LAN without DHCP servers, it will
activate under the following IP address after
timeout.
IP address
: 192.168.0.2
Subnet mask
: 255.255.255.0
Default gateway
: None
Memo
:
● To set a static IP address for VN-V686WPU,
connect VN-V686WPU, the switching hub and
the computer for setting using a straight LAN
cable of Category 5 and above.
ⅷ Set up the computer for setting the IP
address.
● Minimum computer specifications for
setting
OS
: Windows XP (Professional or
Home Edition) (SP2)
Web browser
: Internet Explorer Version 6.0
Note:
● When setting the IP address for VN-V686WPU,
do so by using a network that is made up only of
VN-V686WPU, the computer for setting and the
switching hub.
● Using a hub connected to other network
devices or networks via a LAN cable for setting
can cause problems.
IP Address Settings
VN-V686WPU_EN.book Page 26 Tuesday, December 25, 2007 11:23 AM