Creating realistic sound fields, 2) press 3 or 2 to adjust the output level, 3) repeat 1) and 2) for setting the other speakers – JVC TH-A30R User Manual
Page 28: 2) press 3 or 2 to adjust the output balance, 3) repeat 1) and 2) for setting the other speaker
24
Creating Realistic Sound Fields
B.SEARCH
REW
FF
F.SEARCH
RETURN
TOP MENU
ENTER
VOLUME
MENU
VCR CHANNEL
TUNING
MUTING
1
2
3
4
5
6
7
8
9
0
REMAIN
PROGRAM
D.R.C
ZOOM
SETUP
DSP MODE
SLEEP
TEST
PRO LOGIC
SETTING
SOUND
CLEAR
REPEAT
ANGLE
SLOW
SEARCH
A-B REPEAT
PTY –
PTY +
PTY SEARCH
2 3
SOUND
4
To adjust the output level for the rear speakers
and the subwoofer.
1) Press SOUND repeatedly to select the
“REAR” or “SW.”
• Each time you press the button, the adjustment
indication on the display changes as follows:
REAR
: To adjust the output level for rear
speakers (from –6 dB to +6 dB).
SW (Subwoofer) : To adjust the output level for subwoofer
(from –6 dB to +6 dB).
• “REAR 0dB” and “SW 0dB” are the initial setting. If you
have already changed the setting, another value will
appear.
2) Press
3 or 2 to adjust the
output level.
3 : Increases the output level.
2 : Decreases the output level.
3) Repeat 1) and 2) for setting
the other speakers.
SOUND
00 F 00
00 R 00
CEN
Normal indication
(canceled)
SW
REAR
SOUND
ENTER
3
To adjust the output balance for the front
speakers and the rear speakers
1) Press SOUND repeatedly until one of
the following adjustment indications
appears on the display.
• Each time you press the button, the adjustment indication
on the display changes as follows:
00 F (Front) 00 : To adjust the output balance for the front
speakers.
00 R (Rear) 00 : To adjust the output balance for the rear
speakers.
• “00 F 00” and “00 R 00” are the initial setting (the output
balances are at the center position). If you have already
changed the setting, another value will appear.
2) Press
3 or 2 to adjust the
output balance.
3 : Decreases the left speaker
output, or restores the right
speaker output.
2 : Decreases the right speaker
output, or restores the left
speaker output.
• Each output balance changes
from OFF (silence), –06 (most reduction) to 00 (no
reduction).
3) Repeat 1) and 2) for setting the other speaker.
ENTER
00 F 00
00 R 00
CEN
Normal indication
(canceled)
SW
REAR
EN18-24TH-A30R[B]ff.pm6
02.7.2, 9:49 PM
24