JVC GET0576-001A - Manual (Page 125)

ENGLISH
7 OPERATIONS
Preparation
Canceling the display demonstration and setting the clock
• See also page 14.
1 Turn on the power.
2
[Turn] = [Press]
Cancel the display demonstrations
Select “ DEMO,” then “DEMO OFF.”
Set the clock
Select “ CLOCK” =
“ CLOCK SET.”
Adjust the hour, then press control dial once to proceed to adjust
the minute.
• To return to the previous menu, press BACK.
Changing the display information
When the power is turned off: The current clock time is displayed if “ CLOCK DISP” is set to “CLOCK OFF,”
(see page 14).
When the power is turned on: The display information of the current source changes as follows:
FM/AM Frequency = Clock = Station name * 1 = (back to the beginning)
CD
CD/USB
Audio CD/CD Text: Disc title/performer * 2 = Track title * 2 = Current track number with the
elapsed playing time
=
Current track number with the clock time
=
(back to the beginning)
MP3/WMA: Album name/performer (folder name) * 3 = Track title (file name) * 3 =
Current track number with the elapsed playing time = Current track
number with the clock time = (back to the beginning)
* 1 If no title is assigned to a station, “NO NAME” appears. To assign a title to a station, see page 13.
* 2 If the current disc is an audio CD, “NO NAME” appears.
* 3 If an MP3/WMA file does not have Tag information or “ TAG DISPLAY” is set to “TAG OFF” (see page 14),
folder name and file name appear.
Press and hold until
the main menu is
called up.
• Repeat this
procedure.
EN02-09_KD-R506_001A_f.indd 7 EN02-09_KD-R506_001A_f.indd 7 9/10/08 4:20:05 PM 9/10/08 4:20:05 PM