JVC LPT1029-001A - Manual (Page 75)

Masterpage:Right+
EN
75
Filename [MH50SEK_12Subsidiary.fm]
SUBSIDIARY SETTINGS
Page 75Friday, 14 January 2005 16:44
Your unit needs to memorise all necessary stations in channel
positions in order to record TV programmes. Auto Channel Set
automatically assigns all receivable stations in your area to call
them up by using the PR +/– buttons without going through any
vacant channels.
Auto Channel Set
1
Press SET UP to access the Main Menu screen.
2
Press selection keys to select AINITIAL SET UPB, then press
G.
3
Press selection keys to select ATUNER SETB, then press G.
4
Press selection keys
to select
AAUTO CH
SET B, then press
ENTER.
● When you have
connected the unit to a
TV offering T-V Link via
a fully-wired 21-pin
SCART cable
(A pg. 18), the unit
automatically performs
the Preset Download
and the T-V LINK
screen will appear.
(A pg. 20)
● The Auto Set screen
appears, and remains
on screen while the unit
searches for receivable
stations.
5
View the Confirmation screen.
AAUTO SET COMPLETEDB or ASCAN COMPLETEDB is
displayed on the TV screen. Select
AOKB.
6
Press SET UP to complete the setting.
● Using the Confirmation screen, you can skip or add channel
positions, enter station names and perform other operations.
Refer to pages 76 – 77 for the procedures.
● Depending on reception conditions, the stations may not be
stored in order, and the station names may not be stored
correctly.
NOTES:
● Fine tuning is performed automatically during Auto Channel Set.
If you want to perform tuning manually, refer to
AFine-Tuning
Channels Already Stored B (A pg. 77).
● If you perform Auto Channel Set when the aerial cable is not
connected properly,
ASCAN COMPLETED -NO SIGNAL-B
appears on the TV screen in step 5. In such a case, make sure of
the aerial connection and press ENTER; Auto Channel Set will
start again.
Tuner Set
● Turn on the unit.
● Turn on the TV and select the AV mode.
● Slide the TV/CABLE/SAT/DVD switch to DVD.
IMPORTANT:
Perform the following steps only if ^
^ Auto Channel Set has not been set correctly by Auto Set Up
or by Preset Download. (A pg. 19, 20)
^ you have moved to a different area or if a new station starts
broadcasting in your area.
ENTER
SET UP
FGDE
CABLE/SAT
DVD TV
Selection Keys
13
12
11
AUTO CH SET MANUAL CH SET
SAT CONTROL SET GUIDE PROG SET
TUNER SET CLOCK SET
DVD VIDEO SET UP HDD/DVD SET UP FUNCTION SET UP INITIAL SET UP
SELECT WITH @ THEN PRESS [ENTER] ENTER
SELECT
SET UP
EXIT
PRESS [SET UP] TO EXIT
INITIAL SET UP > AUTO SET
AUTO SET
PLEASE WAIT...
CANCEL
SELECT WITH @ THEN PRESS [ENTER] ENTER
SELECT
SET UP
EXIT
PRESS [SET UP] TO EXIT
IMPORTANT:
● In certain reception conditions, station names may not be
stored correctly, and Auto Guide Programme Number Set may
not work properly. When the Guide Programme numbers are
not set properly, the programme that you do not intended to
record will be timer recorded by the VIDEO Plus+ system of
the unit. When programming the timer using the VIDEO Plus+
system, be sure to check the desired channel is selected
correctly. (A pg. 47)
● Your unit memorises all receivable stations even if reception of
some of them is poor. You can delete those stations with an
unacceptable picture from the list. (A pg. 76,
ADelete A
Channel B)
MH50SEK_00.book Page 75 Friday, January 14, 2005 4:44 PM