JVC LPT1029-001A - Manual (Page 25)

Masterpage:Right+
EN
25
Filename [MH50SEK_05Name.fm]
SAT CONTROL SET
Page 25 Friday, 14 January 2005 16:43
11
Check the result of the test.
If the satellite receiver’s channel number has been changed to
the same one as you set in step 9
Press selection keys to select
AYESB, then press ENTER to finish
the Sat Control Set mode.
If the satellite receiver’s channel number has not been
changed correctly
Press selection keys to select
ANOB, then press ENTER. Then
perform the procedure again from step 6.
NOTES:
● The Satellite Controller may not work with all types of satellite
receiver.
● For some satellite receivers, you need to set its channel input
mode to 2 digit.
● If your satellite receiver has more than two channel modes, be
sure to set to
AAll Channel ModeB. For details, refer to the
instruction manual of the satellite receiver.
● When selecting the satellite receiver’s channel (A step 9),
signals from the remote control may interfere with signals
transmitted from the Satellite Controller. In this case, move the
remote control as close to the unit’s infrared beam receiving
window as possible.
BRAND NAME CODE
JVC
AMSTRAD
ASTON
CANAL SATELLITE
CANAL +
D-BOX
ECHOSTAR (VIA DIGITAL)
FINLUX
FORCE
GALAXIS
GRUNDIG
HIRSCHMANN
HUMAX
ITT NOKIA
JERROLD
KATHREIN
LUXOR
MASCOM
MASPRO
NOKIA
PACE
PANASONIC
PHILIPS
RADIX
RFT
SABA
SAGEM
SALORA
SAMSUNG
SIEMENS
SKY DIGI BOX
SKYMASTER
TECHNISAT
THOMSON
TPS
TRIAX
WISI 73
60, 61, 62, 63, 92
97
81
81
85
82
68
89
88
64, 65, 102
64, 78, 99
88
68
75
70, 71, 96
68
93
70
87, 94
65, 67, 74, 86, 92, 97
74, 92
66, 84, 101
78
69
97
83, 90
68
83
64
92
69, 98
66, 100
97
83
91
64
MH50SEK_00.book Page 25 Friday, January 14, 2005 4:44 PM