JVC DR-M150SEK - Manual (Page 64)

Filename [M150SEK_10Subsidiary.fm]
Masterpage:Left+
64
EN
SUBSIDIARY SETTINGS
Your unit needs to memorise all necessary stations in channel
positions in order to record TV programmes. Auto Channel Set
automatically assigns all receivable stations in your area to call
them up by using the PR +/– buttons without going through any
vacant channels.
Auto Channel Set
1
Press SET UP in DTV mode to access the Main Menu screen.
2
Press selection keys to select AINITIAL SET UPB, then press
ENTER.
3
Press selection keys to select ACHANNEL SETB, then press
ENTER.
4
Select AAUTO SEARCHB, then press ENTER.
● AAUTO SEARCHB
starts.
5
Upon completing
AAUTO SEARCHB, the
screen display returns
to the Main Menu
screen and
AAUTO
SEARCH SCAN
COMPLETED
B
appears on the TV
screen. Press ENTER.
6
Press SET UP to
complete
AAUTO
SEARCH B.
NOTES:
● Fine tuning is performed automatically during Auto Channel Set.
● If you perform Auto Channel Set when the aerial cable is not
connected properly,
ANO SIGNALB appears on the TV screen in
step 4. In such a case, make sure of the aerial connection, select
ARETRYB, then press ENTER. Auto Channel Set will start again.
Manual Channel Set
Perform manual channel set to add new channels or when
checking the signal condition of the channels.
1
Press SET UP in DTV mode to access the Main Menu screen.
2
Press selection keys to select AINITIAL SET UPB, then press
ENTER.
3
Press selection keys to select ACHANNEL SETB, then press
ENTER.
4
Press selection keys to select AMANUAL SEARCHB, then
press ENTER.
5
Press the number
keys to enter the
channel number, then
press ENTER.
● AMANUAL SEARCHB
starts.
● Confirm the signal
condition with the
signal level bar. If the
picture is displayed, it
does not matter even if
the level bar indicates
below mid-level.
● Once the channel is received, the screen displays the
programme list for a few seconds before returning to the
AMANUAL SEARCHB screen.
● If the channel is not received, the screen display returns to the
AMANUAL SEARCHB screen without displaying the programme
list.
● Repeat step 5 to add or check other channels.
6
Upon completing AMANUAL SEARCHB, press SET UP on the
remote control.
Tuner Set
● Turn on the unit.
● Turn on the TV and select an input mode such as EXT1.
● Slide the TV/DVD switch to DVD.
IMPORTANT:
Perform the following steps only if ^
^ Auto Channel Set has not been set correctly by Auto Set Up.
(A pg. 17)
^ you have moved to a different area or if a new station starts
broadcasting in your area.
SET UP
(FGDE)
ENTER
DVD TV
Selection Keys
radio
BBC ONE Scot
BBC TWO Scot
BBC THREE
BBC NEWS 24
BBCi
CBBC Channnel
BBC R Scotland
BBC R n Gaidheal
0% 100%
Auto Search
Press to Cancel search ...
CANCEL
UHF CH:65
Programs
IMPORTANT:
● In certain reception conditions, the station channel numbers
may not be stored correctly. When the channel numbers are
not set properly, the programme that you do not intended to
record will be timer recorded. When programming timer
recording, be sure to check that the desired channel is
selected correctly.
ACheck, Cancel And Change ProgrammesB
(A pg. 41)
● Your unit memorises all receivable stations even if reception of
some of them is poor. You can delete those stations with an
unacceptable picture from the PR list. (A pg. 65,
ADelete A
Channel B)
● If channel set is performed, all the favourite channels that have
been set will be removed. The
AFAVOURITE MODEB
(A pg. 20) setting will automatically be set to AOFFB.
INITIAL SET UP
SELECT WITH [CURSORS]
THEN PRESS [ENTER]
T-V LINK
RETURN
OK
SELECT
SET UP
OK
SCAN COMPLETED
AUTO SEARCH
AUTO SEARCH
DVD SET UP FUNCTION SET UP
CHANNEL SET DTV SETTING CLOCK SET
26
0 9 ..
Manual Search
Select ENTER Value entry Search
Channel Number
Signal Level
Signal Quality
M150SEK_00.book Page 64 Wednesday, June 15, 2005 4:04 PM