Tray lock, Balance setting – JVC SP-THS11F User Manual
Page 33
When using the on-screen bar:
1
ON SCREEN twice.
2
Press Cursor
/2 to highlight
.
Press ENTER.
4
Press Cursor Y/5 repeatedly to select
“A-B”.
5
Press ENTER at the beginning of the
part you want to repeat (point A).
6
Press ENTER at the end of the part you
want to repeat (point B).
Press ON SCREEN.
To cancel
Select “OFF” in step 4, then press
.
NOTE
When playing back a DVD VIDEO, A-B Repeat Playback is possible
only within the same title.
• “A-B” cannot be selected during Program and Random Playback.
• “A-B” cannot be selected during playback with PBC function.
You can lock the tray and prohibit the unwanted disc ejection.
On the center unit ONLY:
While the system is on standby mode, press
0 ! 7 pressed and
held.
• The system turns on and “LOCKED” appears on the display
window.
• If you try to eject the disc, “LOCKED” appears to indicate that
the tray is locked.
Carry out the same operation again.
• The system turns on and “UNLOCKED” appears on the display
window.
You can adjust the balance between the front left and front right
speakers.
• Before you start operation;
There is a time limit when doing the following steps. If the setting is
cancelled before you finish, start from step 1 again.
1
SETTING, with SHIFT pressed.
Example:
Press Cursor
/ to make an
adjustment or selection.
"#$
The adjustment display automatically disappears a few
seconds later with the current setting.
Tray lock
Dolby D
2/0 . 0ch
Dolby D
2/0 . 0ch
Balance Setting
B A L
C T R
B A L
R
-- 5
THS33-11[B]-06advanced.fm Page 30 Monday, February 14, 2005 2:59 PM