JVC WR-MG88U - Manual (Page 3)

3
3. Check that there are no scratches or cracks
on the marine case every time you use it.
The marine case must withstand water pressure
with use. Repeated exposure to pressure
eventully leads to material fatigue, which may
result in damage of the marine case. Every time
you use the marine case, check in advance
that there are no scratches or cracks. If you
frequently use the marine case, be sure to ask for
maintenance at the store of purchase. (There is a
charge for maintenance.)
To protect your camera and ensure optimum use,
keep the examples listed above in mind when using
the marine case.
JVC accepts no responsibility for water leakage or
damage to anything inside the marine case (camera,
SD card, etc.) due to careless usage of
this product. Be sure to follow correct procedures
when using the marine case.
Accessories
• Glass cleaner (to prevent “steaming up”)
• Cleaning fl uid (to remove dirt)
• Silicone grease
• Silicone cloth
• Silica gel (Preservative)
• Lens tissue paper
• Swab
• Strap
• 2 O-rings : 1 Spare
• Base (A,B)
The attachment base differs
depending on the model of
camera that you have.
• Grip
Commercially available
lights and weights can also
be attached.
• Pick
• Screw tightening key
• 2 hexagonal wrenches
Large: for assembling grip
Small: buckle opener
• Lens hood
Only attached to certain
types of cameras.
Maintenance Kit – Sold Separately (Part
Number: MG8_MTKIT)
You can purchase the following set of expendable
parts. Please contact your local JVC service
representative.
• O-Ring x2
• Silicone grease (5 g) x1
• Silica Gel (preservative) (2 g) x5
• Lens tissue paper (50 sheets) x1