JVC HR-J435EK - Manual (Page 28)

28
TIMER RECORDING(cont.)
Regular Timer
Programming
If you don’t know the PlusCode number for the programme you
wish to record, use the following procedure to set your recorder
to timer-record the programme.
Remember, the clock must be set before you can programme
the timer (
੬
pg. 9)
First press OPERATE to turn on the recorder.
1 2
4 5
3
6
8
0
7 9
1
3
2
6
q
START+/–
DATE+/–
PROG.
STOP+/–
2,3
4
1
5
ACCESS TIMER PROGRAM-
MING SCREEN
1
Press PROG.
ACCESS PROGRAMME
SCREEN
2
Press START +/–. (If you’re
just starting out, “Program
1” appears.)
The front display panel looks like this:
ENTER PROGRAMME
START TIME
3
Press START +/– to enter
the time you want
recording to start.
● Press and hold START
+/– to move in 30-
minute increments, or
press and release
repeatedly to move 1
minute at a time.
The front display panel looks like this:
ENTER PROGRAMME STOP
TIME
4
Press STOP +/– to enter the time you want recording to
stop.
ENTER PROGRAMME DATE
5
Press DATE +/–. (The current date appears on screen.
The date you enter appears in its place.)
PROGRAM 1
START STOP
– : – – – : – –
SP ON
DATE TV PROG
25. 12 – –
[+ –] : SET = : OK
SP
PROGRAM 1
START STOP
21 : 00 – : – –
SP ON
DATE TV PROG
25. 12 – –
[+ –] : SET = : OK
SP