Recording features, Select preset to watch, Start recording – JVC HR-J435EK User Manual
Page 23: Engage itr mode, Set recording duration, Set counter display, Reset counter, Record one programme while watching another, Instant timer recording (itr), Elapsed recording time indication
23
Record One Programme
While Watching Another
SELECT PRESET TO WATCH
1
Once recording is in progress, all you need to do is to
set the preset controls on the TV for the station you
wish to view.
● The programme selected with the TV’s preset controls
appears on the TV screen while the one selected with
the TV PROG. or PUSH JOG
%fi buttons is recorded
on the tape.
1
2
4
5
3
6
8
0
7
9
1
3
2
6
q
TV PROG.
PUSH JOG
DISPLAY
C.RESET
TV PROG.
Recording
Features
COUNTER RESET
RECORD
Instant Timer Recording (ITR)
This easy method lets you record for from 30 minutes to 6 hours
(selectable in 30-min. increments), and shuts the recorder off
after recording is finished.
START RECORDING
1
Press RECORD on the recorder.
ENGAGE ITR MODE
2
Press RECORD again. ITR blinks and 0:30 appears on
the front display panel.
SET RECORDING
DURATION
3
If you want to record for more than 30 minutes, press
RECORD to extend the time. Each press extends
recording time by 30 minutes.
NOTE:
You can only perform ITR using the RECORD button on the
recorder's front panel.
Elapsed Recording Time
Indication
You can check the exact time of a recording.
SET COUNTER DISPLAY
1
Press DISPLAY until a counter reading appears on the
dispay panel.
RESET COUNTER
2
Press COUNTER RESET before starting recording or
playback.
● The counter is reset to “0:00:00” and shows the exact
elapsed time as the tape runs.