JVC 1105RYMMDWJEIN User Manual
Page 59
55
Manufacturer
Codes
JVC
01, 02
Amstrad
03, 04, 05, 06, 31
BT
01
Canal Satellite
20
Canal+
20
D-Box
24
Echostar
17, 18, 19, 21
Finlux
11
Force
28
Galaxis
27
Grundig
07, 08
Hirschmann
07, 17, 37
ITT Nokia
11
Jerrold
16
Kathrein
13, 14, 34
Luxor
11
Mascom
32
Maspro
13
Nokia
24, 26, 33
Pace
10, 25, 31
Panasonic
15
Philips
09, 23
RFT
12
Saba
35
Sagem
22, 29
Salora
11
Selector
29
Skymaster
12, 36
Thomson
35
TPS
22
Triax
30
Wisi
07
Initial setting: 01
Manufacturer
Codes
JVC
01
Kenwood
02, 03
Mitsubishi
06
Panasonic
07
Philips
05
Pioneer
08
Sony
09
Toshiba
04
Yamaha
10
Initial setting: 01
Manufacturers’ codes are subject to change without
notice. If they are changed, this remote control cannot
operate the equipment.
❏ Changing the transmittable signals for operating
a STB
1
Press and hold STB
.
2
Press STB CONT.
3
Enter the manufacturer’s code using buttons
1 – 9, and 0.
See “Manufacturers’ codes for STB” below.
4
Release STB
.
Now, you can perform the following operation on the STB.
STB
:
Turn on or off the STB.
After pressing STB CONT, you can perform the following
operations on the STB.
CHANNEL +/–:
Change the channel numbers on the
STB.
1 – 9, 0, +10:
Select the channel numbers on the
STB.
See the instructions supplied with the STB for details.
5
Try to operate your STB by pressing STB
.
When your STB turns on or off, you have entered the correct
code.
If more than one code is listed for your brand of STB, try each
one until the correct one is entered.
❏ Changing the transmittable signals for operating
a DVD player
1
Set the mode selector to “DVD.”
2
Press and hold DVR/DVD
.
3
Press DVR/DVD.
4
Enter the manufacturer’s code using buttons
1 – 9, and 0.
See “Manufacturers’ codes for DVD player” below.
5
Release DVR/DVD
.
Now, you can perform the following operation on the DVD
player.
DVR/DVD
:
Turn on or off the DVD player.
3:
Start playback.
4:
Return to the beginning of the current
chapter (or fast-forward for some
models).
¢:
Skip to the beginning of the next chapter
(or fast-reverse for some models).
7:
Stop playback.
8:
Pause playback.
DVD MENU:
Display the menu recorded on DVD
VIDEO discs.
1 – 9, 0, +10:
Select the chapter number.
After pressing DVR/DVD or DVD MENU, you can perform the
following operations on the DVD player.
5/∞/3/2:
Select an item on the menu screen.
SET:
Enter the selected item.
See the instructions supplied with the DVD player for details.
6
Try to operate your DVD player by pressing
DVR/DVD
.
When your DVD player turns on or off, you have entered the
correct code.
Manufacturers’ codes for DVD player
Manufacturers’ codes for STB
NOTE
You cannot use this remote control to operate other
manufacturers’ DVD recorder.
If more than one code is listed for your brand of DVD player,
try each one until the correct one is entered.
51-55RX-D701S[B].p65
05.11.7, 2:54 PM
55