beautypg.com

Turning off the power with the sleep timer, Making sounds natural, Signal and speaker indicators on the display – JVC 1105RYMMDWJEIN User Manual

Page 26: Press cc converter repeatedly

background image

22

Basic adjustment of auto memory

This receiver memorizes sound settings for each source:
• when you turn off the power, and
• when you change the source.

When you change the source, the memorized settings for the
newly selected source are automatically recalled.
The following can be stored for each source:
• Audio input setting (see page 20)
• Midnight mode (see page 31)
• Volume level for each source when One Touch Operation is

set to “ONE TOUCH OP: ON” (see page 32)

• Speaker output level (see page 37)
• Digital equalization pattern (see page 38)
• Bass boost (see page 38)
• Input attenuator mode (see page 38)
• Surround/DSP mode selection (see page 50)

NOTE

If the source is “FM” or “AM,” you can assign a different setting
for each band.

Signal and speaker indicators on the display

Signal indicators

Speaker indicators

The signal indicators light up as follows:

L:

When digital input is selected: Lights up when the

left channel signal comes in.

When analogue input is selected: Always lights up.

R:

When digital input is selected: Lights up when the

right channel signal comes in.

When analogue input is selected: Always lights up.

C:

Lights up when the center channel signal comes in.

LS:

Lights up when the left surround channel signal comes
in.

RS:

Lights up when the right surround channel signal comes
in.

S:

Lights up when monaural surround signal comes in.

SB:

Lights up when the surround back channel signal
comes in.

LFE: Lights up when the LFE channel signal comes in.

NOTES

• When “A MULTI” is selected in the audio input setting (see

page 20), all the signal indicators except “SB,” “S,” and “LFE”
light up.

• When playing back multi-channel digital sound recorded in

DVD-Audio with HDMI connection (see pages 11 and 20),
the signal indicators may not light up correctly.

The speaker indicators light up as follows:

• The subwoofer indicator (

S.WFR

) lights up when

“SUBWOOFER” is set to “SUBWOOFER: YES.” For details,
see page 28.

• The other speaker indicators light up only when the

corresponding speaker is set to “SMALL” or “LARGE,” and
also when required for the current playback.

LINEAR PCM

L

LS

SB

RS

S.WFR

PL

NEO : 6 DSP
3D-PHONIC

LFE

C

96 / 24

AUTO SURR

VIRTUAL SB

HEADPHONE

x

DIGITAL

DIGITAL AUTO

ANALOG

DUAL MONO

SB

S

SB

R

L

LS

SB

RS

S.WFR

LFE

C

SB

S

SB

R

L

LS

SB

RS

S.WFR

LFE

C

SB

S

SB

R

Turning off the power with the Sleep
Timer

You can fall asleep while listening to music—Sleep Timer.

From the remote control ONLY:

Press SLEEP repeatedly.

• Each time you press the button, the shut-off time changes in 10

minute intervals. The SLEEP indicator lights up on the display.

SLEEP indicator

When the shut-off time comes:
The receiver turns off automatically.

To check or change the remaining time until the shut-off
time:
Press SLEEP once.
The remaining time (in minutes) until the shut-off time appears.
• To change the shut-off time, press SLEEP repeatedly.

To cancel the Sleep Timer:
Press SLEEP repeatedly so that “SLEEP OFF” appears on the
display. (The SLEEP indicator goes off.)
• The Sleep Timer is also canceled when you turn off the

receiver.

Making sounds natural

JVC’s CC (Compression Compensative) Converter eliminates
jitter and ripples, achieving a drastic reduction in digital distortion
by processing the digital music data in 24 bit-quantization and by
expanding the sampling frequency to 176.4 kHz (for fs 44.1 kHz
signals)/192 kHz (for fs 48 kHz signals) on the front speakers.
By using the CC Converter, you can obtain a natural sound field
from both digital and analogue sources.

Press CC CONVERTER repeatedly.

• Each time you press the button, the mode changes as follows:

CC CNVRTR 1:

Select when playing back an analogue
source or a digital source with non
compressed digital sound signal (Linear
PCM).
The CC CONVERTER 1 indicator lights
up on the display.

CC CNVRTR 2:

Select when playing back a source with
compressed digital sound signal (Dolby
Digital or DTS).
The CC CONVERTER 2 indicator lights
up on the display.

CC CNVRTR OFF:

Select when not using the CC Converter.

L

S.WFR

R

AUTO SURR

SLEEP

ANALOG

10min 20min 30min 40min 50min 60min

90min

OFF (canceled)

80min

70min

19-22RX-D701S[B]_f.p65

05.11.7, 2:54 PM

22

This manual is related to the following products: