JBL CONTROL NOW AW User Manual

Page 13

English

4. The mounting bracket is designed to trap the fl ange of the JBL Control NOW

speaker by securing the mounting bracket cap with two screws through the
bottom of the mounting bracket. This will support the weight of the speaker.
Now slide the mounting-bracket cap over the assembly. Secure the mount-
ing- bracket cap by inserting two #10-32 x 2" (M5 51 mm) screws (provided) in
the bottom of the mounting bracket and tightening. Repeat the process with the
remaining speaker.

Mounting-Bracket Cap

Mounting Bracket

#10-32 x 2" (M5 51 mm) Screws (2)

(side view)

#10-32 x 2"

Screws (2)

(M5 51 mm)

5. Now rest the second JBL Control NOW speaker’s rear fl ange in the mounting

bracket, as shown, and complete the process. Secure the mounting-bracket
cap with two #10-32 x 2" (M5 51 mm) screws through the bottom of the
mounting bracket.

#10-32 x 2"

Screws (2)

6. To orient the JBL logo into the correct position, pull the JBL logo slightly

outward from the speaker grille and rotate. The JBL logo is held in place by
a spring. Peel the adhesive cover off the mounting-bracket covers and
attach to the top and bottom of the mounting assembly.

Mounting-Bracket
Covers