Maintenance schedule – John Deere AC-G3200i User Manual
Page 35
Operator’s Manual
35
MAINTENANCE SCHEDULE
PERIODIC MAINTENANCE TABLE:
The maintenance schedule indicated in the table is based on the normal generator operation. Should the
generator be operated in extremely dusty condition or in heavier loading condition, the maintenance intervals
must be shortened depending on the contamination of oil, clogging of filter elements, wear of parts, and so on.
Service
* NOTE: Initial oil change should be performed after the first twenty (20) hours of operation. Thereafter, change oil every
hundred (100) hours. Before changing oil, check for a suitable way to dispose of old oil. Your local zoning or
environmental regulations will give you more detailed instructions on proper disposal.
**NOTE: As to the procedures for these items, contact your authorized John Deere Service Dealer.
(Initial)
Maintenance Item
s
Every 8
hours (Daily)
Every 20
hours
Every 50
hours (Weekly)
Every 100
hours
Every 200
hours (Monthly)
Every 500
hours
Every 1000
hours
Clean generator and
check bolts and nuts.
•
Check and refill
engine oil.
•
AC receptacles
•
DC terminal
•
Engine switch
•
Check Multi Monitor
•
Clean air element.
•
Clean spark plug.
•
Change engine oil. *
•
•
Spark arrester
•
Replace air element.
•
Clean fuel filter.
•
Clean and adjust spark
plug and electrodes.
•
Replace spark plug.
•
Remove carbon from
cylinder head. **
•
Check and adjust valve
clearance. **
•
Clean and adjust
carburetor. **
•
Overhaul engine **
•
Rotor
•
Stator
•
Replace engine mount
•
Replace fuel lines
Yearly
(Refill daily up to upper level)