John Deere AC-G3200i - Manual (Page 28)

Operating the Generator
28 Operator’s Manual
OPERATION
USING ELECTRIC POWER:
WARNING: MAKE SURE THAT THE APPLIANCE IS
SWITCHED OFF BEFORE CONNECTING IT TO
THE GENERATOR.
DO NOT MOVE THE GENERATOR WHILE IT IS
RUNNING.
BE SURE TO GROUND THE GENERATOR.
FAILURE TO GROUND UNIT MAY LEAD TO
ELECTRICAL SHOCK.
AC APPLICATION:
1. Make sure the voltage indicated in the LED screen is the
normal level (approx. 120V).
NOTE: This generator is thoroughly tested and adjusted in
the factory. If the generator does not produce the specified
voltage, consult your nearest authorized John Deere
Dealer
2. Turn off the switch(es) of the electrical appliance(s) before
connecting to the generator.
3. Insert the plug(s) of the electrical appliance(s) into the
receptacle. (Fig. 11)
• Using Table 1, check the amperage of the receptacles used
and be sure not to take a current exceeding the specified
amperage.
• Be sure that the total wattage of all connected appliances
does not exceed the rated output of the generator, see
specifications on page 30.
WARNING: TO TAKE POWER OUT FROM THE TWIST
LOCK RECEPTACLE, INSERT THE PLUG INTO
THE RECEPTACLE, AND TURN IT CLOCKWISE
TO THE LOCK POSITION.
BE SURE TO GROUND THE GENERATOR IF THE
CONNECTED ELECTRICAL DEVICE IS
GROUNDED.
DO NOT PUT FOREIGN OBJECTS INTO THE PLUG
RECEPTACLE.
NOTE: When the “O_Lod” (overload) is indicated in the
LED screen, AC output is cut off on the grounds that
the generator operation is in overload condition or
appliance(s) will be out of order.
Stop the generator immediately, check the appliance
and/or generator for overloading, and have repaired as
necessary by an authorized John Deere Dealer.
4. Turn on the switch of the appliance.
Table 1
(Fig. 11)
Style Ampere Receptacle AC
plug
Description
Up to
20A
NEMA
5-20R
NEMA
5-20P
GFCI (Ground
Fault Circuit
Interrupter)
Receptacle,
duplex
Up to
30A
NEMA
5-30R
NEMA
5-30P
Locking
Receptacle
AC-G3200i
AC-G4300i
Multi Monitor
Multi Monitor
Engine Switch Ground Terminal DC Terminals
AC Receptacles (20A)
Key Switch DC Circuit Breaker AC Circuit Breaker
Engine Switch Ground Terminal DC Terminals Key Switch DC Circuit Breaker AC Circuit Breaker
AC Receptacles (30A)
AC Receptacles (20A) AC Receptacles (30A)
CONTROL PANELS