John Deere IDLC100-3J - Manual

Engine Performance Curves 4045 - Generator June 2007
Ref: Engine Emission Label
Tier-3 Emission Certifications: Certified by:
Notes:
ENGINE PERFORMANCE CURVE
Air Intake Restriction ................... 12 in.H
2
O (3 kPa)
Exhaust Back Pressure ........... 30 in.H
2
O (7.5 kPa)
Gross power guaranteed within + or - 5% at SAE J1995
and ISO 3046 conditions:
77 °F (25 °C) air inlet temperature
29.31 in.Hg (99 kPa) barometer
104 °F (40 °C) fuel inlet temperature
0.853 fuel specific gravity @ 60 °F (15.5 °C)
Conversion factors:
Power: kW = hp x 0.746
Fuel: 1 gal = 7.1 lb, 1 L = 0.85 kg
Torque: N•m = lb-ft x 1.356
All values are from currently available data and are subject
to change without notice.
STANDARD CONDITIONS
Air Intake Restriction ................... 12 in.H
2
O (3 kPa)
Exhaust Back Pressure ........... 30 in.H
2
O (7.5 kPa)
Gross power guaranteed within + or - 5% at SAE J1995
and ISO 3046 conditions:
77 °F (25 °C) air inlet temperature
29.31 in.Hg (99 kPa) barometer
104 °F (40 °C) fuel inlet temperature
0.853 fuel specific gravity @ 60 °F (15.5 °C)
Conversion factors:
Power: kW = hp x 0.746
Fuel: 1 gal = 7.1 lb, 1 L = 0.85 kg
Torque: N•m = lb-ft x 1.356
All values are from currently available data and are subject
to change without notice.
STANDARD CONDITIONS
All OEM Gen Set Engine Applications must be pre-
screened for torsional vibration compatibility with the
respective alternator end hardware.
OEM Engine Application Engineering will perform this
computer-based analysis work upon request.
- PRIME - STANDBY
70
(32)
50
(23)
30
(14) Fuel -- lb/hr (kg/hr)
20
(15)
120
(90) 80
(60)
140
(104)
160
(119)
60
(45)
100
(75)
Brake Power -- hp (kW)
40
(30)
PowerTech E TM 4.5L Engine
Model: 4045HF285
144 hp (107 kW) Prime
158 hp (118 kW) Standby
[See Option Code Tables]
Rating: Gross Power
Application: Generator (60 Hz)
Target: 100 kWe Standby Market
* Revised Data
Curve 4045HF2851800158 ............................. Sheet 1 of 2
June 2007
Nominal Engine Power @ 1800 RPM
Prime Standby
HP kW HP kW
144 107 158 118
Generator
Efficiency
%
Fan Power
(6% of Standby)
Power
Factor Prime Rating 2
Standby Rating
1,2
ISO 8528 G2
Block Load
Capability
hp kW kWe kVA kWe kVA
88-92 8.7 6.5 0.8 89-93 111-116 98-103 123-129 100%
Note 1: Based on nominal engine power.
Note 2: kWe / kVA rating assumes 90% efficiency. “Generator Efficiency %” will vary.
CARB; EPA