Radio basic operations, Listening to the radio, Select the band (fm1, fm2, fm3 or am) – JVC KD-SX959R User Manual

Page 6: Start searching a station

ENGLISH

RADIO BASIC OPERATIONS

Listening to the radio

Select the band (FM1, FM2, FM3 or AM).

You can select any one of FM1, FM2, and FM3 to listen to an
FM station.

Start searching a station.

When a station is received, searching stops.

To stop searching before a station is received, press the same button you have pressed
for searching.

To tune in a particular frequency without searching

1 Press FM/AM/DAB repeatedly to select the band (FM or AM).
2 Press and hold

until “MANU (Manual)” starts flashing on the display.

Now you can manually change the frequency while “MANU” is flashing.

3 Press

repeatedly until the frequency you want is reached.

• If you hold down the button, the frequency keeps changing (in 50 kHz intervals for FM and

9 kHz intervals for AM–MW/LW) until you release the button.

To tune in FM stations only with strong signals (ONLY FOR KD-SX999R)
Press the LO/RPT/INT (Local/Repeat/Intro) button so that the LOCAL indicator lights up on
the display.
Each time you press the button, the LOCAL indicator lights up and goes off alternately.

Note:

This function only works while searching FM stations including SSM preset (see page 7).

LO/RPT/INT

(ONLY FOR

KD-SX999R)

FM/AM

DAB

Selected band (or clock time: see page 30)
appears.

To search stations
of higher
frequencies

To search stations
of lower frequencies

F1
(FM1)

F2
(FM2)

F3
(FM3)

EN06-09.KD-SX999R[E]/1

98.12.8, 0:55 PM