JVC KD-SX959R - Manual (Page 18)

18
ENGLISH
CD OPERATIONS
1
Open the control panel.
2
1. Insert a disc into the loading slot.
The unit turns on, draws a CD and starts playback
automatically.
2. Close the control panel by hand.
Playing a CD
Notes:
• When a CD is inserted up side down, “PLEASE EJECT” appears on the display.
When you open the control panel by pressing
0, the CD automatically ejects.
• When you play a CD Text, the disc title and performer appear on the display. Then the current track
and elapsed playing time appears on the display. See also “Playing a CD Text” (page 21) and
“Selecting the scroll mode” (page 34).
If a CD Text includes much text information, some may not appear on the display.
Elapsed
playing time
Current track
To stop play and eject the CD
Press
0
.
CD play stops, the control panel opens, then the CD automatically ejects from the loading slot.
If you change the source to FM, AM, CD changer or external component, the CD play also
stops (without ejecting the CD this time).
Notes:
• If the ejected disc is not removed for about 15 seconds, the disc is automatically inserted again into
the loading slot to protect it from dust. (CD play will not start this time.)
• You can eject the CD even when the unit is turned off.
Note on One-Touch Operation:
When a CD is already in the loading slot, pressing CD turns on the unit and starts playback
automatically.
1
Total playing time of
the inserted disc Total track number
of the inserted disc
EN18-22.KD-SX999R[E]/1 98.12.8, 0:56 PM 18