Selecting the dimmer mode – JVC KD-SX959R User Manual
Page 31
31
ENGLISH
Selecting the dimmer mode
When you turn on the car head lights, the display automatically dims (Auto Dimmer).
When shipped from the factory, Auto Dimmer mode is activated.
• AUTO: Activates Auto Dimmer.
• OFF:
Cancels Auto Dimmer.
• ON:
Always dims the display.
1 Press and hold SEL (Select) for more than 2 seconds so that “PSM” appears on the lower
part of the display.
2 Select “DIMMER” with
¢
or
4
.
3 Select the desired mode with the control dial.
The dimmer mode changes as follows:
Note on Auto Dimmer:
Auto Dimmer equipped with this unit may not work correctly on some vehicles, particularly on those
having a control dial for dimming.
In this case, set the dimmer mode to “ON” or “OFF”.
Controlling the volume automatically (Audio Cruise:
ONLY FOR KD-SX999R)
You can select the proper cruise mode for your car.
This unit change the volume level automatically (at 3 possible levels) based on the driving
speed of your car by detecting the alternator’s generating frequency (Audio Cruise).
If you want to use this mode, follow the procedures below. When shipped from the factory,
this mode is set to “OFF.”
• CRUISE 1: Select this if your car is relatively quiet.
• CRUISE 2: Select this if your car is relatively loud.
The volume increase rate is twice as much as that of the CRUISE 1 setting.
• OFF:
Cancels Audio Cruise.
1 Press and hold SEL (Select) for more than 2 seconds so that “PSM” appears on the lower
part of the display.
2 Select “CRUISE” with
¢
or
4
.
3 Select the desired mode with the control dial.
The cruise mode changes as follows:
When this function is turned on (the CRUISE indicator lights up on the display), the proper
volume level is automatically selected among the 3 possible levels according to the driving
speed, and the selected level is shown on the display.
AUTO
ON
OFF
When the driving speed increases.
When the driving speed decreases.
CRUISE 1
CRUISE 2
OFF
EN27-34.KD-SX999R[E]/1
98.12.8, 0:57 PM
31