JVC GR-DVL365 User Manual

Page 59

DISPLAY

MAKE CONNECTIONS

Also refer to pg. 22 and 23.

A JVC VCR equipped with a remote

pause connector . . .

..... connect the editing cable to the Remote PAUSE

connector.

A JVC VCR not equipped with a remote

pause connector but equipped with an
R.A.EDIT connector . . .

..... connect the editing cable to the R.A.EDIT

connector.

A VCR other than above . . .

..... connect the editing cable to the remote control’s

PAUSE IN connector.

Insert a recorded tape into the camcorder. Set the

VIDEO/MEMORY Switch to “VIDEO” (GR-DVL867/
DVL865/DVL767/DVL765/DVL567/DVL367/DVL365
only), then set the Power Switch to “PLAY” while
pressing down the Lock Button located on the switch.

Turn the VCR power on, insert a recordable tape

and engage the AUX mode (refer to the VCR’s
instructions).

NOTES:

● Before Random Assemble Editing, make sure the

indications do not appear on the TV monitor. If they do,
they will be recorded onto the new tape.

To choose whether or not the following displays
appear on the connected TV . . .
• Date/Time

..... set “DATE/TIME” to “AUTO”, “ON” or “OFF” in the

Menu Screen (

੬

pg. 50).

Or, press DISPLAY on the remote control
(provided) to turn on/off the date indication.

• Time Code

..... set “TIME CODE” to “ON” or “OFF” in the Menu

Screen (

੬

pg. 50).

• Playback Sound Mode, Tape Speed And Tape Running

Displays

..... set “ON SCREEN” to “LCD” or “LCD/TV” in the Menu

Screen (

੬

pg. 50).

● Set the video out select switch of the cable adapter as

required:
Y/C

: When connecting to a TV or VCR which

accepts Y/C signals and uses an S-Video
cable.

CVBS : When connecting to a TV or VCR which does

not accept Y/C signals and uses an audio/video
cable.

● When editing on a VCR equipped with a DV input

connector, an optional DV cable can be connected
instead of an S-Video cable and audio/video cable.

To Remote

PAUSE or R.A.EDIT

To PAUSE IN

Editing cable
(provided)

S-Video cable
(optional)

Audio/Video cable
(provided)

Connect when an S-Video cable is not used.

** When connecting cables, open this cover.
*** JLIP : GR-DVL167/DVL160

EDIT : GR-DVL867/DVL865/DVL767/DVL765/

DVL567/DVL367/DVL365

Connector cover**

To AV

To JLIP***
or EDIT***

To S-VIDEO

To AUDIO,
VIDEO*
and

-IN

connectors

“Y/C”/“CVBS”
video out
select switch

If your VCR has the
SCART connector,
use the provided
cable adapter.

For GR-DVL167/DVL160 Owners:

ATTENTION FOR EDITING CABLE

Make sure you connect the end with the core
filter (plug which has 3 rings around the pin) to
the camcorder.

VCR