How to use the menu functions, Cont’d) – JVC TM-A210G User Manual
Page 11

10
Set-up menu items
Purpose
Settings
H. POSITION
Adjusts the horizontal position of
the screen (+ : Horizontal position
shifts to the right/–: Horizontal
position shifts to the left)
WHITE BALANCE
Adjusts the white balance
Selects DRIVE (DRV) or CUT OFF (CUTO) adjustment.
Screen setting is changed to the selected setting mode.
DRIVE
R.DRIVE
Adjusts red level
B.DRIVE
Adjusts blue level
CUT OFF
R. CUT OFF
Adjusts red cut off
G. CUT OFF
Adjusts green cut off
B. CUT OFF
Adjusts blue cut off
CONTROL LOCK
Sets the operation buttons on the
front panel to control lock mode
STATUS DISPLAY
Sets the status display of the color
system
INPUT REMOTE
Sets external control of input
selection (INPUT A/B)
ASPECT REMOTE
Sets external control of the aspect
ratio
4. To set the other set-up menu items, repeat the
procedures 2 and 3.
5. Press the MENU button to quit.
Notes:
÷ When the CONTROL LOCK function is
set to ON, pressing operation buttons on
the front panel will display the message
“CONTROL LOCK ON!” on the screen
for about 3 seconds.
÷ The CONTROL LOCK function is
maintained even when the power is
turned off.
÷ To turn off the CONTROL LOCK
function, while holding the MENU button
press the CHROMA/PHASE button.
Then set the CONTROL LOCK function
to OFF.
÷ Even when the CONTROL LOCK
function is set to ON, the following
operations are available:
– Power Switch operation
– Volume control with the VOLUME/
SELECT buttons
– External control when INPUT
REMOTE or ASPECT REMOTE is
valid
– Display or disappear of the MENU> screen. ÷ The STATUS DISPLAY function can be set to display (ON) or not display (OFF) ● When the INPUT REMOTE function is valid (ON), pressing the Input A or ÷ To enable INPUT REMOTE or ASPECT REMOTE, select the function on the Front panel Function Contents button displayed MENU EXIT Quit (or Release) the
the present color system when the
power is turned on or the input signal is
changed. Refer to page 7 for more
information.
Input B buttons will display the message
“REMOTE ON!” on the screen for about
3 seconds.
OFF ON
ON OFF
HOW TO USE THE MENU
FUNCTIONS
(cont’d)
OFF ON
OFF ON
–05
–04
–01
00
+01
+04
+05
–09
–08
–01
00
+01
+08
+09
–09
–08
–01
00
+01
+08
+09
–09
–08
–01
00
+01
+08
+09
–09
–08
–01
00
+01
+08
+09
–09
–08
–01
00
+01
+08
+09
MENU
EN_TM_A210GE.p65
03.3.12, 7:11 PM
10