Jonsered CS 2240 User Manual

Page 34

English –

Repair instructions

Dismantling the carburettor

1. Dismantle the cylinder cover and the air filter.
2. Disassemble the handle holder (see figure 29).

Fig 29

Fig 30

Fig 31

Fig 32

3. Push the throttle actuator rod out of the han-

dle part. Unhook it from the carburettor (see

figure 30).

Remove the return hose (B) and suction hose

(C). Loosen the fuel pump (D). Let the fuel

hose (G) remain in place (see figure 31).

Loosen the screws (E) and unhook the rubber

mountings (F)

(see figure 32).

NOTE!
Take care when lifting out the carburettor so
that the fuel hose does not become loose.