JVC DR-MV5S - Manual (Page 77)

Masterpage:Right+
EN
77
Filename [MV5S_13Subsidiary.fm]
SUBSIDIARY SETTINGS
Page 77Monday, 28 February 2005 18:13
The VCR Plus+ programing system assigns a VCR Plus+ guide
channel to the TV channels and the cable channels. These guide
channel numbers are also called the VCR Plus+ channel codes.
Most TV listings have a section, usually a chart, indicating the
guide channel numbers assigned to each station.
To ensure that VCR Plus+ timer recording operates correctly, it is
necessary to set the “VCR Plus+ Guide Channel” for each station.
If you have moved to a different area or if a broadcasting station’s
channel number has been changed, perform the following steps to
set the correct guide channel number.
NOTES:
● In many instances, the VCR Plus+ guide channel numbers for cable
and broadcast TV stations DO NOT match the channel number on
which it is received by your unit or cable box. Check your TV listing,
or contact your cable supplier for details.
● Many TV stations can be viewed on cable. Check your TV listing, or
contact your cable supplier for details.
Guide Channel Number Set
1
Press SET UP to access the Main Menu screen.
2
Press w e to select “INITIAL SET UP”, then press t.
3
Press w e to select “TUNER
SET”, then press t.
4
Press rt to select “GUIDE CH
SET”, then press ENTER.
5
Press rt to select “GUIDE
CH”, then press ENTER.
6
Press rt to select the Guide
Channel number for the desired
station as shown in the TV listings.
Then press ENTER.
● To change the Guide Channel
number in 10 increments, press and
hold rt.
7
Press rt to select “DVD CH”, then press ENTER. Press rt
to select the number of the unit’s channel position on which the
Guide Channel number’s broadcast is received by the unit or the
DBS receiver. Then press ENTER.
● Repeat steps 5 – 7 as necessary.
8
Press SET UP to complete the setting.
Changing VCR Plus+ ® Setting
● Turn on the unit.
● Turn on the TV and select the AV mode.
● Slide the TV/DVD switch to DVD.
rtwe
ENTER
SET UP
Guide Channel Number
“Guide Channel (GUIDE CH) Number” refers to the assigned TV
station numbers, according to broadcast area, for the VCR Plus+
timer recording. The Guide Channel Numbers can be found in
most TV listings.
DVD SET UP
BAND
FUNCTION SET UP INITIAL SET UP
CLOCK SET
CATV
AUTO CH SET
MANUAL CH SET
GUIDE CH SET
TUNER SET
SELECT WITH [CURSORS]
THEN PRESS [ENTER] OK
SELECT EXIT
SET UP
DVD SET UP
GUIDE CH
FUNCTION SET UP INITIAL SET UP
DVD CH
INITIAL SET UP / GUIDE CH SET
RETURN
1
---
SELECT WITH [CURSORS]
THEN PRESS [ENTER] OK
SELECT EXIT
SET UP
MV5S_00.book Page 77 Monday, February 28, 2005 6:18 PM