VM9510
15
Operation (continued)
System Menu Options
To access the system menu, press the OSD (23) button to display the on-screen menu. Push
the ENTER (4) button down to highlight “SYSTEM”, and then press the ENTER button.
“AUTO” will become highlighted in red. Push the ENTER button down to highlight the property
you want to modify, and then press ENTER.
•
AUTO (Auto-Close): Press ENTER to toggle the Auto-Close function between “Auto” and
“Manl”. When “Auto” is selected, the screen will automatically retract when the ignition is
turned off. When “Manl” is selected, the screen will remain in the last position before the
ignition was turned off.
•
LOUD: Press ENTER to toggle the Loudness between “On” and “Off”.
•
CENTER: Use the ROTARY ENCODER (3) to control the center speaker volume level by
adjusting it from “MIN” to “MAX”, with levels 1-12 in between.
• DIMMER: Press ENTER to adjust the brightness between “1” and “13”, controlling the
TFT screen.
•
RESET: Press ENTER to reset the unit, returning all system values to the default factory
settings.
Push the ENTER button to the right to return to the
