VM9510
13
Operation (continued)
Fader
TFT Screen Closed: To adjust the fader, press and hold the ROTARY ENCODER (3) for > 2
seconds until “Sub-W” appears in the LCD panel. With “Sub-W” displayed, press the knob again
4 times to access the fader control. Turn the ROTARY ENCODER to adjust the fader between
the front and rear speakers from F14 (full front) to R14 (full rear). “00” represents an equal
balance between the front and rear speakers.
TFT Screen Open: To adjust the fader, press the OSD (23) button to display the on-screen
menu. Push the ENTER (4) button down to highlight “Audio”, and then press the ENTER button.
“Woofer” will become highlighted in red. Push the ENTER button down to highlight “Fader”, and
then press ENTER. Turn the ROTARY ENCODER (3) to adjust the fader between the front and
rear speakers from F14 (full front) to R14 (full rear). “00” represents an equal balance between
the front and rear speakers. Push the ENTER button to the right to return to the
