VM9510
14
Operation (continued)
Clock
You can only view the clock or modify its settings with the TFT screen closed.
CLOCK DISPLAY
Press the DISP (5) button to show the clock in the LCD panel.
CLOCK ADJUSTMENT (TIME)
Press and hold the DISP (5) button until the clock flashes in the LCD panel. Push the ENTER
button (4) to the left or right to adjust the hour. Push the ENTER button up or down to adjust
the minutes. Continue changing the hour to move between AM and PM. If you do not adjust
the time within 10 seconds, the LCD panel reverts to the previous display.
Auxiliary Input
You can connect an audio and/or video device (MP3, cassette, navigation unit, VCR, gaming
console, etc.) to the unit using one of the auxiliary input jacks (AV1 or AV2) to listen to an
auxiliary audio source. Use the “Wiring” diagram on page 4 to locate the auxiliary input jacks.
TFT Screen Closed: To utilize an auxiliary input device, press MODE (6) until “AV1” or “AV2”
appears on the LCD panel.
TFT Screen Open: To utilize an auxiliary input device, press the OSD (23) button to display
the on-screen menu. “Source” appears highlighted in red. Press the ENTER button to highlight
“TUNER”. Push the ENTER button down to highlight “AV1” or “AV2”. Push the ENTER button
to the right to return to the
