JVC GR-DX28 - Manual (Page 48)

48
EN
MasterPage: Heading0_Left
Appears if there are no video clip files stored in the
memory card when you attempt memory card playback.
(GR-DX97/77/67 only)
Appears when the camcorder does not recognise the
loaded memory card. Remove the memory card once
and insert it again. Repeat these procedures until no
indication appears. If the indication still appears, the
memory card is corrupted. (GR-DX97/77/67 only)
Appears when playing back a file that is not compatible
with DCF or a file with a size that is not compatible with
this camcorder. (GR-DX97/77/67 only)
● Appears when you attempt to shoot digital still images
when the write protection tab on the SD Memory Card
is set to the “LOCK” position. (GR-DX97/77/67 only)
● Appears when you attempt MEMORY SELECT menu
operation with a write-protected SD Memory Card
loaded. (GR-DX97/77/67 only)
The error indications (E01, E02 or E06) show what type
of malfunction has occurred. When an error indication
appears, the camcorder turns off automatically. Remove
the power supply (battery, etc.) and wait a few minutes for
the indication to clear. When it does, you can resume
using the camcorder. If the indication remains, consult
your nearest JVC dealer.
The error indications (E03 or E04) show what type of
malfunction has occurred. When an error indication
appears, the camcorder turns off automatically. Eject the
cassette once and re-insert it, then check if the indication
clears. When it does, you can resume using the
camcorder. If the indication remains, consult your nearest
JVC dealer.
NO E-MAIL CLIP STORED
CARD ERROR!
UNSUPPORTED FILE!
CHECK CARD’S WRITE PROTECTION SWITCH
E01, E02 or E06
UNIT IN SAFEGUARD MODE REMOVE AND
REATTACH BATTERY
E03 or E04
UNIT IN SAFEGUARD MODE EJECT AND REINSERT
TAPE
USER MAINTENANCE
Before cleaning, turn off the camcorder and remove the
battery pack and AC Adapter.
To clean the exterior
Wipe gently with a soft cloth. Put the cloth in diluted mild
soap and wring it well to wipe off heavy dirt. Then wipe
again with a dry cloth.
To clean the LCD monitor
Wipe gently with a soft cloth. Be careful not to damage
the monitor. Close the LCD monitor.
To clean the lens
Blow it with a blower brush, then wipe gently with lens
cleaning paper.
NOTES:
● Avoid using strong cleaning agents such as benzine or
alcohol.
● Cleaning should be done only after the battery pack has
been removed or other power units have been
disconnected.
● Mould may form if the lens is left dirty.
● When using a cleaner or chemically treated cloth refer to
the cautions of each product.
● To clean the viewfinder, please consult your nearest JVC
dealer.
Cleaning The Camcorder
GR-DX97PAL.book Page 48 Tuesday, January 6, 2004 12:44 PM