beautypg.com

Random assemble editing [r.a.edit, Set remote/vcr code, Buttons and functions (rm-v717u) – JVC GR-DX28 User Manual

Page 41: Pg. 41 – 44

background image

EDITING

EN

41

MasterPage: Advan_Right

ADV

A

N

C

ED

F

E

A

T

UR

ES

Create edited videos easily using your camcorder as the
source player. You can select up to 8 “cuts” for automatic
editing, in any order you like. R.A.Edit is more easily
performed when the MBR (Multi-Brand Remote) is set to
operate with your brand of VCR (see “VCR CODE
LIST”
), but can also be performed by operating the VCR
manually.

● Use the optional remote control kit RM-V717KITU. It is a

set composed of RM-V717U remote control, an Editing
cable* and an Editing extension cable.

* The Editing cable is not required with this camcorder.

● Refer to remote control kit’s instructions as well.

Set Remote/VCR Code

1

Turn off the power to the

VCR and point the remote
towards the VCR’s infrared
sensor. Then, referring to the
VCR CODE LIST, press and
hold MBR SET, and enter the
brand code.
The code is automatically set
once you release MBR SET,
and the VCR’s power comes
on.

2

Make sure the VCR’s power

is on. Then, while holding
SHIFT, press the button on the
remote for the desired function.
The functions the remote can
control are PLAY (U), STOP (8), PAUSE (9), FF (5),
REW (3) and VCR REC STBY (79; you do not need
to press SHIFT for this one).

You are now ready to try Random Assemble Editing.

IMPORTANT:

Although the MBR is compatible with JVC VCRs and those of
many other makers, it may not work with yours or may offer
limited functions.

NOTES:

● If the VCR’s power does not come on in step 1, try another

code from the VCR CODE LIST.

● Some brands of VCR do not come on automatically. In this

case, turn the power on manually and try step

2.

● If the remote control is not able to control the VCR, use the

controls on the VCR.

● When the remote control’s batteries run out, the VCR brand

you have set will be erased. In that case, replace the old
battery with a new one to reset the VCR brand.

VCR CODE LIST

Buttons And Functions (RM-V717U)

A Infrared beam transmitting window
Transmits the beam signal.
B DISPLAY Button*

C SHIFT Button (see the left column)

D SLOW Rewind/Forward Buttons*

Left/Right Buttons*

E REW Button*

F FADE/WIPE Button (੬ pg. 43)

G EFFECT ON/OFF Button*

H EFFECT Button*

I PAUSE IN Connector (੬ pg. 42)

J MBR SET Button (see the left column)

K Up Button*

INSERT Button*

L Down Button*

A. DUB Button*

M PLAY Button*

N FF Button*

O STOP Button*

P PAUSE Button*

Q R.A.EDIT Buttons

(

੬ pg. 43, 44)

a Zoom (T/W) Buttons*

b START/STOP Button*

c SNAPSHOT Button*

* Functions the same as each corresponding button on the

provided remote control RM-V720U (

੬ pg. 19)

Random Assemble Editing [R.A.Edit]

MBR SET

SHIFT

RM-V717U (optional)

BRAND NAME

CODE

AKAI

62, 64, 77

BLAUPUNKT

13

DAEWOO

18

FERGUSON

97, 98, 32

GRUNDIG

14, 34

HITACHI

66, 63

JVC A
JVC B
JVC C

91
96
93

LG/GOLDSTAR

11

MITSUBISHI

67, 68

NEC

37, 38

PANASONIC

13, 17, 11, 94, 18

PHILIPS

19, 95, 11, 94, 91, 96, 12, 33, 72

SAMSUNG

94

SANYO

36, 35

SELECO, REX

91, 96

SHARP

15, 10

SONY

65, 60, 39, 31

THOMSON,
TELEFUNKEN, SABA,
NORDMENDE

91, 96, 97, 32

TOSHIBA

69, 61

GR-DX97PAL.book Page 41 Tuesday, January 6, 2004 12:44 PM

This manual is related to the following products: