JVC XV-M512SL - Manual (Page 28)

Basic operations
26
Basi
c
oper
ati
o
ns
Resuming playback
The unit can memorize the position on a disc where you interrupt playback, and resume playback from that position
later.
1 Set the “RESUME” setting on the “SYSTEM” page of the preference display to “ON”.
(See page 56 for details about how to set.)
2
At the position you want to interrupt playback, press
7, or press DVD STANDBY/ON
on the remote
control or on the front panel.
The unit memorizes the interrupted position.
• If you interrupt playback by pressing 7 in step 2 above and then turn off the power, the memory is not cleared.
7 While the disc you interrupt playback last time is still in the disc tray.
Press 3.
The unit starts playback from the position where you interrupted playback last time.
• To clear the resume position memory
Carry out one of the followings.
*Take out the disc from the tray.
*Press any one of the DISC (1 through 3) buttons on the front panel.
*Press
7 while stopped.
*Turn on the unit by pressing DVD STANDBY/ON (on the remote control) or (on the front panel).
To memorize the interrupted position
To resume playback
NOTES
• The resume function does not work with Audio CD and MP3 discs.
• The resume function does not work if “ RESUME” on the “ SYSTEM” page of the preference display is set to “ OFF”.
• In the case of a Video CD/SVCD disc with PBC function, the unit may resume playback from a point slightly earlier than the
resume point you stored.
• The resume function does not work in the program or random mode.
P.23-26-eng.fm Page 26 Friday, July 19, 2002 8:47 PM