JVC VN-V686U User Manual

Page 37

Exiting the JPEG Viewer

To exit, press the [X] button at the top right of the window.

● During the next startup of the built-in viewer, launch the Internet Explorer and enter the URL of the

built-in viewer in the address field.
For example, if the IP address of VN-V686U is 192.168.0.2, enter as follows:

http://192.168.0.2/cgi-bin/v686viewing.cgi?v686monitor_j.html

● After the [Security Settings] screen appears, press the [OK] button to proceed.

PTZ

Open the [PTZ Controller] screen.
Manual operations are available. Configure settings of preset position
registration and Auto Pan/Auto Trace in the [PTZ Controller] screen.

Note:

● When the PTZ Controller screen is first opened in the computer,

ActiveX will be installed.

T For details of [PTZ controller Operation], please refer to

[INSTRUCTIONS](pdf) in the supplied CD-ROM.

Setup

Displays the built-in viewer settings window.
This setting screen is used to set the built-in viewer as a software on the
computer.

Note:

● Settings on this setting screen do not affect settings of the VN-V686U

unit.

Click [X].

VN-V686WPU_EN.book Page 37 Wednesday, January 16, 2008 10:39 AM