JVC VN-V686U - Manual (Page 10)

10
Getting Started
Transporting the unit
ⅷ Remove the connecting cables when
transporting the unit.
ⅷ When transporting the unit, turn off the power
of the system.
ⅷ Pack the unit with cushioning material so as
to avoid shock when transporting.
ⅷ Handle the unit with care and do not subject it
to vibration or shock.
Transportation
ⅷ Do not throw away the original box of the unit.
Keep it and use it for transporting the unit in
future.
ⅷ As the camera unit is of an easily rotatable
structure, secure the camera unit inside the
dome cover such that it does not rotate
before transporting. Otherwise, an error may
occur during camera operation.
A Face the heat release vents upward and
secure the lens section with tape.
B Insert cushioning material wrapped with air
caps (approx. 50 mm x 200 mm) at two
opposite sides of the camera.
Saving Energy
ⅷ When the camera is not in use for a long
time, turn off the power of the system for
safety and energy conservation reasons.
Copyright Protection
ⅷ With the exception of the user being the
copyright holder or when permission such as for
duplication has been granted by the copyright
holder, permission is required in principle for the
duplication, modification, or transmission of
copyrighted video and audio data.
Unauthorized duplication, modification, or
transmission of copyrighted material may
constitute a copyright infringement, and the
user may be liable to compensate for any
damages. When using copyrighted video/audio
data, be sure to check the license agreement of
the copyrighted material thoroughly.
When rights or rights holders are involved with
regard to the targeted duplicating subject,
permission may be required for shooting or
using (processing) it. Be sure to check the
licensing conditions thoroughly.
Maintenance
ⅷ Turn off the power before performing
maintenance.
ⅷ Wipe using a soft cloth.
Wiping with thinner or benzene may melt or
tarnish its surface. For tough stains, wipe using
a cloth that is dipped into a neutral detergent
diluted with water, followed by wiping with a dry
cloth.
ⅷ When the same position is monitored for 24
hours continuously over a long period, the
increased contact resistance on the horizontal
rotation section may cause noise interferences
in the images and operation from the computer
may become unstable. As such, this product is
equipped with an auto cleaning function that
performs cleaning once a week.
Precautions (contiuned)
A
B
Cushioning material
Secure with tape
Ⅵ Consumable parts
The following are consumable parts. They must
be replaced once they reach their lifetime.
The lifetime is only an estimation and differs
according to the usage environment and
conditions. Replacement of consumable parts is
chargeable within the guarantee period.
● Zoom lens assembly
Zoom operation..... Approx. 2 million operations
Focus operation .... Approx. 4 million operations
● Slip ring......... Approx. 5 million operations
● Cooling fan.............. Approx. 50,000 hours
● Heater relay............ Approx. 100,000 times
VN-V686WPU_EN.book Page 10 Wednesday, January 16, 2008 10:39 AM