beautypg.com

Connecting audio/video components, Analog connections, Enhancing your audio system —only for rx-8030vbk – JVC RX-7030VBK User Manual

Page 13

background image

11

PHONO

IN

RIGHT

LEFT

R

L

RX-8030VBK

Connecting Audio/Video Components

When connecting individual components, refer also to the manuals
supplied with them.

Analog Connections

If your audio components have digital audio output terminal,
connecting them using the digital cords explained in “Digital
Connections” (see page 16) will give you better sound quality.

Audio component connections

Use the cables with RCA pin plugs (not supplied).
• Connect the white plug to the audio left jack, and the red plug to

the audio right jack.

If your audio components have a COMPU LINK jack
See also page 41 for detailed information about the connection
and the COMPU LINK remote control system.

CAUTION:

If you connect a sound-enhancing device such as a graphic equalizer
between the source components and this receiver, the sound output
through this receiver may be distorted.

Turntable

To listen to the sound after connection, press PHONO.

If a ground cable is
provided for your turntable,
connect the cable to the
screw marked (

H) on the

rear.

Note:

This connection is for the turntable with an MM (moving-magnet) type
cartridge.
Any turntables incorporating a small-output cartridge such as an MC
(moving-coil) type must be connected to this receiver through a
commercial head amplifier or step-up transformer. Direct connection
may result in insufficient volume.

RX-8030VBK

L

R

L

R

SURR BACK

SURR

CENTER

FRONT

SUBWOOFER

PREOUT

R

L

R

L

Power amplifier

Left front speaker

Right front speaker

Power amplifier

Right surround

speaker

Left surround

speaker

Power amplifier

Power amplifier

Center speaker

Enhancing your audio system
—Only for RX-8030VBK

You can use this receiver as the pre-amplifier (control amplifier)
when you connect power amplifiers to the PREOUT jacks on the
rear using cables with RCA pin plugs (not supplied).
• Connect the white plug to the audio left jack, and the red plug to

the audio right jack.

Note:

If you connect one surround back speaker, connect the surround back
speaker to the left surround back PREOUT jack (SURR BACK L).

To audio output

Turntable

RX-8030V

ONLY

RX-8030V

ONLY

Surround back speakers

Left / Right

01-16_8030&7030[J]10.pm6

03.2.13, 2:45 PM

11