28 button functions - pip, Pip (picture-in-picture) – JVC AV 32120 User Manual
Page 28
28
Button Functions - PIP
O
N
/M
OVE
Turn PIP on by pressing the O
N
/M
OVE
button.
(PIP) O
N
/M
OVE
E
XIT
to turn PIP off
Once PIP is turned on, you can move the PIP
window to any of the TV’s main picture’s four
corners with the O
N
/M
OVE
button.
O
N
/M
OVE
• Each press of O
N
/M
OVE
will shift the PIP window
to a different corner.
F
REEZE
Use the F
REEZE
button to lock a single, still image
onto the PIP window.
F
REEZE
• If PIP is off when F
REEZE
is pressed, a snapshot
of the main screen is taken and placed in the
PIP window.
• If PIP is on when F
REEZE
is pressed, the image
in the window when the button was pressed is
held.
S
OURCE
You can select the signal source for the PIP
window image.
S
OURCE
• If the PIP tuner does not have a signal, the PIP
window will be blue.
C
HANNEL
+/- For PIP
Like the main C
HANNEL
+/- buttons, C
HANNEL
+/-
for PIP lets you scan through the channels in the
PIP window.
C
HANNEL
+/-
• Direct channel selection with the 10 key pad for
PIP is not possible.
S
WAP
You can exchange the channel displayed on the
main screen for the one shown in the PIP window
by pressing S
WAP
.
S
WAP
02
07
• In order for PIP to work, the television must be set to “TV mode”. If you play a videotape, your TV will switch to “VCR
mode”. The TV only sees one signal in VCR mode. In order to use PIP, press the TV/VCR button to return to TV Mode.
• The PIP window is
1
/
9
the size of the full screen.
• PIP will not display blocked channels or programs. A blue screen will display instead.
NOTES:
PIP (Picture-In-Picture)
PIP displays two separate pictures on screen.
Your television has 2-Tuner PIP, meaning you can
view pictures from two different channels
simultaneously. A special set of PIP control buttons
are located on the upper part of the remote
control. Descriptions of each button appear on this
page.
Note:
PIP is available on the following models
only: AV-36150, AV-35115, AV-32150, AV-27150.