How to use the menu functions, Press the volume/select buttons to set, Press the menu button – JVC TM-A101G User Manual
Page 5
TM-A101G
1-5
No.51921
ENGLISH
EXIT
CHROMA
MENU
PHASE
BRIGHT
CONTRAST
VOLUME/SELECT
DISPLAY AND SELECTIONS IN THE
• H. POSITION
• CONTROL LOCK
• INPUT REMOTE
• WHITE BALANCE
• STATUS DISPLAY
• ASPECT REMOTE
You can set the following set-up menu items.
1. While pressing the MENU button, press the
CHROMA/PHASE button.
The
2. Press the CHROMA/PHASE or CONTRAST/BRIGHT
button to select the desired menu item.
A selection mark (
4
) is put next to the selected item.
3. Press the VOLUME/SELECT buttons to set.
●
To adjust the white balance, select WHITE BALANCE and
press the VOLUME/SELECT (+) or (–) button to display the
CUT OFF or DRIVE setting screen, then adjust each setting.
●
Press the EXIT (MENU) button to return to the
Notes:
1
Selection mark (
4
): Indicates the
menu item you select.
2
Menu item: Menu items you can
select.
3
Setting display: Indicates the
current settings (value).
4
Function display: The functions of
the front panel buttons (5 buttons
on the left) correspond to the
function displayed.
Function
Contents
displayed
ᮢ
Forward the menu item.
ᮡ
Reverse the menu item.
–
Lower the adjustment
value. (to the minimum)
+
Raise the adjustment
value. (to the maximum)
4
Forward the setting value.
1
Reverse the setting value.
EXIT
Exit the
screen. (release)
DRV
Selects DRIVE adjustment.
CUTO
Selects CUT OFF
adjustment.
RB
Adjusts red and blue
signal level.
RGB
Adjusts red, green and
blue signal level.
Turns the ON-SCREEN
display on or off. (This
DISP
function is effective only
in the DRIVE or CUT OFF
adjustment mode.)
Front panel
Function
Contents
button
displayed
CHROMA/
ᮢ
Forward selection mark (
4
)
PHASE
CONTRAST/
ᮡ
Reverse selection mark (
4
)
BRIGHT
Front panel
Function
Contents
button
displayed
+
Increase (to max. value)
4
Forward the setting value
CUTO
Selects CUT OFF setting screen
–
Decrease (to min. value)
1
Reverse the setting value
DRV
Selects DRIVE setting screen
VOLUME/
SELECT (–)
VOLUME/
SELECT (+)
●
Parameter for H. POSITION can be set separately depending on the video input
(Input A (VIDEO) or Input B (VIDEO)) selected by the input select buttons on the front
panel.
Select the required video input with the input select buttons on the front panel in
advance.
Note:
‰
H. POSITION
: 00
WHITE BALANCE
CONTROL LOCK
: OFF
STATUS DISPLAY
: ON
INPUT REMOTE
: OFF
ASPECT REMOTE
: OFF
1
2
3
4
9
H. POSITION
WHITE BALANCE
CONTROL LOCK
STATUS DISPLAY
INPUT REMOTE
ASPECT REMOTE
MENU
CHROMA
PHASE
CHROMA
PHASE
BRIGHT
CONTRAST
VOLUME/SELECT
EXIT
CHROMA
MENU
PHASE
BRIGHT
CONTRAST
VOLUME/SELECT
< MENU >
‰
SHARPNESS
: +03
COLOR SYSTEM
: AUTO
ASPECT RATIO
: 4–3
Menu items
Purpose
Setting range
SHARPNESS
Picture sharpness
COLOR
Color system
SYSTEM
ASPECT RATIO
Aspect ratio
Front panel
Function
Contents
button
displayed
+
Increase (to max. value)
4
Forward the setting value
–
Decrease (to min. value)
1
Reverse the setting value
VOLUME/
SELECT (–)
VOLUME/
SELECT (+)
Front panel
Function
Contents
button
displayed
CHROMA/
ᮢ
Forward selection mark (
4
)
PHASE
CONTRAST/
ᮡ
Reverse selection mark (
4
)
BRIGHT
Front panel
Function
Contents
button
displayed
MENU
EXIT
Quit (or Release) the