Rear view, Rear panel, 5english – JVC LCT2141-001A-H User Manual
Page 5: Oi o r video a terminals [video a in/out, T video b terminals [video b in/out, Y audio a terminals [audio a in/out, U audio b terminals [audio b in/out, I ac inlet [ac in, O power cord, Rt y u
5
ENGLISH
IN
OUT
A
VIDEO
AUDIO
IN
Y/C IN
OUT
IN
OUT
B
A
B
o
i
o
r Video A terminals [VIDEO A IN/OUT]
Video signal input (IN) and output (OUT) terminals.
The output terminal is bridge-connected.
IN : Video signal input terminal
OUT : Bridge-connected video signal output terminal
Notes:
* For corresponding audio signals, use the AUDIO A
terminals y.
* Also refer to the BASIC CONNECTION EXAMPLE on
page 11.
t Video B terminals [VIDEO B IN/OUT]
[ BNC connector ]
Video signal input (IN) and output (OUT) terminals.
The output terminal is bridge-connected.
IN : Video signal input terminal
OUT : Bridge-connected video signal output terminal
[ Y/C connector ]
Y/C (S-Video) signal input (mini-DIN 4-pin connector)
terminal.
Y/C IN : Y/C signal input terminal.
Notes:
* For corresponding audio signals, use the AUDIO B
terminals u.
* There is no Y/C (S-video) signal output terminal.
* When both VIDEO B terminals are connected (input) at
the same time, the Y/C terminal is given priority.
* Also refer to the BASIC CONNECTION EXAMPLE on
page 11.
REAR VIEW
To AC outlet
(230 V AC, 50 Hz/60 Hz)
y Audio A terminals [AUDIO A IN/OUT]
Input (IN) and output (OUT) terminals for the audio signals
corresponding to the VIDEO A terminals r. The output
terminal is bridge-connected.
IN : Audio signal input terminal
OUT : Bridge-connected audio signal output terminal
Notes:
* For corresponding video signals, use the VIDEO A
terminals r.
* Also refer to the BASIC CONNECTION EXAMPLE on
page 11.
u Audio B terminals [AUDIO B IN/OUT]
Input (IN) and output (OUT) terminals for the audio signals
corresponding to the VIDEO B terminals t. The output
terminal is bridge-connected.
IN : Audio signal input terminal
OUT : Bridge-connected audio signal output terminal
Notes:
* For corresponding video signals, use the VIDEO B
terminals t.
* Also refer to the BASIC CONNECTION EXAMPLE on
page 11.
i AC Inlet [AC IN]
Power input connector. Connect the provided AC power
cord o to an AC outlet (230 V AC, 50 Hz/60 Hz).
o Power cord
Connects the provided power cord (230 V AC, 50 Hz/60 Hz)
to the AC IN connector.
r
t
y
u
IN
OUT
A
VIDEO
AUDIO
IN
Y/C IN
OUT
IN
OUT
B
A
B
For United Kingdom
For European countries
02-15EN_TM-A14E_f.indd 5
02-15EN_TM-A14E_f.indd 5
06.6.9 3:13:30 PM
06.6.9 3:13:30 PM