JVC LYT1366-001A - Manual (Page 41)

Cleaning Up a Recording Medium
MODE:
/ /
Writing speed of recording media tends to become slow after long period of repeated use.
To regain the speed, execute cleanup periodically.
NOTE:
Make sure to use the provided AC adapter for the power supply when cleaning up a
recording medium.
Set the power switch to or .
●
If the AC adapter is not connected to the camera, a warning message appears. In this
case, connect the AC adapter.
Press MENU. The menu appears.
Press to select [ MEMORY CARD SETTING], then press .
Press to select [ CLEAN UP], then press .
Press to select [CF SLOT] or [SD SLOT], then press .
CF SLOT : CF card
SD SLOT: SD card
Press to select [EXECUTE], then press .
●
To cancel clean up, select [CANCEL], then press .
When clean up is finished, [CLEANING UP COMPLETED] appears. Press to
complete the operation.
●
It may take for a while until cleanup is completed.
CAUTION:
Do not remove the recording medium or perform any other operation (such as turning off
the power) during cleanup.