JVC DR-M70SEK - Manual (Page 59)

Ch
ang
ing
the
Se
ttin
g
m
enu
59 EN
Note
• Press [CLEAR] to erase numbers entered
incorrectly.
• If you forget your password or you want to clear all
settings in Parental lock, enter [4], [7], [3], [7] using
[the Number buttons] at the option window. Your
password is cleared and parental levels are set to
“All.”
Changing Video Out system
Setting TV system
1 In stop mode, press [SET UP].
2
Select “Advanced Setting Menu”
using [Cursor
U / D], then press
[ENTER].
If it has already appeared, proceed to step 3.
3
Select “Playback” using
[Cursor
U / D], then press [ENTER].
4
Select “Video Out” using
[Cursor
U / D], then press [ENTER].
5 Press [ENTER].
6 Select the desired system setting
using [Cursor
U / D], then press
[ENTER].
PAL: Outputs a modified PAL signal for viewing
discs recorded with the NTSC system on a
PAL system TV.
Auto: Changes the video system (PAL / NTSC)
automatically according to the format of
the inserted disc.
7
Press [SET UP] to exit.
Note
• With discs recorded using the PAL system, a PAL
signal is output for viewing on a PAL system TV.
• Discs recorded with the PAL system cannot be
viewed on an NTSC system TV.
• With discs recorded using the NTSC system, an
NTSC signal is output for viewing on an NTSC or
Multi system TV.
• With discs recorded using the NTSC system, select
PAL to view on a PAL system TV.
Auto
Video Out
PAL
- TV System
E6851BD_EN.book Page 59 Tuesday, August 2, 2005 5:57 PM