JVC DR-M70SEK - Manual (Page 12)

12
Bef
o
re yo
u st
art
EN
Guide to On Screen Displays
DISPLAY menu
With a disc inserted into the unit, press
[ON SCREEN] to display the on screen display. The
menu shows information about what is recorded on
the disc.
This is an example screen for explanation. Displayed
items vary depending on the actual mode.
1 Disc type and format mode.
In some descriptions in this manual, only one type of
disc is indicated as an example.
2 Position number and audio status of the
programme.
3 Title number, chapter number and the
time lapse of disc playback.
4 Each icon means:
5 Recording mode and remaining time.
6 Status of the current disc.
Setting menus
Press [SET UP] in stop mode to display “Easy Setting
Menu” or “Advanced Setting Menu”. Choose either
“Easy Setting Menu” or “Advanced Setting Menu”
using [Cursor
U / D], then press [ENTER] to
change between the menus.
“Easy Setting Menu” and “Advanced Setting Menu”
are available from the Setting Menu. The “Easy
Setting Menu” consists of the settings frequently
needed, while the “Advanced Setting Menu” consists
of all the settings available. You can set the items
marked with
in the “Easy Setting Menu.”
The unit remembers which setting menu you used last
time and recalls it when you press [SET UP] in stop
mode next time, even if power is switched off. (i.e., if
you use the “Easy Setting Menu” and then turn the
unit off, the “Easy Setting Menu” will appear next time
you turn on the unit and press [SET UP] in stop
mode.)
Easy Setting Menu:
You can make the settings of the basic items as
follows.
1 Clock:
Set the unit clock.
2 Channel:
Set up auto tuning or manual tuning.
3 DVD-RW Recording Format:
Select the DVD-RW recording format between Video
mode and VR mode.
4 Timer Programming:
Programme a timer recording.
5 Auto Finalise:
Set Auto Finalise to “ON” or “OFF”.
6 Disc / CD Playback Mode:
“Disc” is available only when a DVD-RW / R disc is
inserted into the unit. If a DVD-Video (commercially
available), a new DVD-R disc or a finalised DVD-R
disc is inserted into the unit, you cannot select “Disc.”
“CD Playback Mode” is available only when an Audio
CD, Video CD or a CD-RW / R disc containing MP3 /
JPEG files is inserted into the unit.
P22
1 1 0:00:00 DVD-RW
Video mode
SP 1:35
Main
1
2
3
4
6
5
: Search
: Audio
: Subtitle
: Angle (except VR mode)
: Repeat
: Marker
: Noise Reduction
: Zoom
Easy Setting Menu
Clock
Channel
DVD-RW Recording Format
Timer Programming
Auto Finalise
Disc
Advanced Setting Menu
Video mode
E6851BD_EN.book Page 12 Tuesday, August 2, 2005 5:57 PM