Dynamic range control (default: on), Fast forward with audio (default: on), Press [set up] to exit – JVC DR-M70SEK User Manual
Page 57: Hint
Ch
ang
ing
the
Se
ttin
g
m
enu
57
EN
Note
When playing back a disc with copyright protection:
• Even if you select “96kHz,” the sound is down
sampled to 48 kHz.
Select a setting using
[Cursor
U / D], then press [ENTER].
Your setting is activated.
PCM:
Converts the Dolby Digital into PCM
(2 channel).
If your amplifier / decoder is NOT compatible
with Dolby Digital, set to “PCM”.
Stream: Outputs Dolby Digital signals.
If your amplifier / decoder is compatible with
Dolby Digital, set to “Stream”.
Hint
When playing back a DVD-RW disc recorded in VR
mode:
• If the audio source on a disc is in Dolby Digital
format, set “Dolby Digital” to “PCM” so that you can
switch to main audio (L), sub audio (R), or a
combination of both (L / R) using your amplifier /
decoder.
Select a setting using
[Cursor
U / D], then press [ENTER].
Your setting is activated.
PCM:
Converts MPEG into PCM.
If your amplifier / decoder is NOT compatible
with MPEG, set to “PCM.”
Stream: Outputs MPEG Audio signals.
If your amplifier / decoder is compatible with
MPEG, set to “Stream.”
Select a setting using
[Cursor
U / D], then press [ENTER].
Your setting is activated.
ON: Outputs DTS signals.
If your amplifier / decoder is compatible with
DTS, set to “ON.”
OFF: No DTS signal is output.
If your amplifier / decoder is NOT compatible
with DTS, set to “OFF.”
Dynamic Range Control (Default: ON)
Set to “ON” to make the dynamic range narrower.
Select a setting using
[Cursor
U / D], then press [ENTER].
Your setting is activated.
The Dynamic Range Control function is effective
only with analogue audio connection.
Fast Forward with Audio (Default: ON)
Set to “ON” to output the sound during DVD playback
at x1.5 fast forward.
Select a setting using
[Cursor
U / D], then press [ENTER].
Your setting is activated.
5
Press [SET UP] to exit.
Dolby Digital conversion (Default: Stream)
Settings for MPEG (Default: PCM)
Digital Out - Dolby Digital
PCM
Stream
Stream
PCM
Digital Out -
MPEG
Settings for DTS (Default: ON)
Digital Out - DTS
OFF
ON
Playback
TV Aspect
Audio Language
Subtitle Language
Digital Out
Dynamic Range Control
Fast Forward with Audio
Video Out
Disc Menu Language
Parental Lock
16:9 Wide
ON
ON
OFF
Original
English
All
Dynamic Range Control
OFF
ON
Playback
TV Aspect
Audio Language
Subtitle Language
Digital Out
Dynamic Range Control
Fast Forward with Audio
Video Out
Disc Menu Language
Parental Lock
16:9 Wide
ON
ON
OFF
Original
English
All
Fast Forward with Audio
OFF
ON
ON
E6851BD_EN.book Page 57 Tuesday, August 2, 2005 5:57 PM