JVC GET0721-001A - Manual (Page 10)

10 ENGLISH
STEP 1: Tagging the song
While receiving a song with PSD...
TAG SAVED
The tagged PSD is stored on the unit.
When an Apple iPod/iPhone is connected
(page 14), the tagged PSDs are automatically
transferred to the iPod/iPhone. Go to STEP 3 to
purchase the song.
To check the number of tagged songs
stored on the unit, press and hold TAG.
To delete the tagged songs from the unit
1 Press and hold MENU.
2 Turn the control dial to select “TAG ALL
CLR,” then press and hold to confirm.
STEP 2: Transferring the tagged PSD to
your iPod/iPhone
Connect the iPod/iPhone to the unit. (page 14)
The source changes to “USB-IPOD,” the tagged
PSDs are automatically transferred to the iPod/
iPhone.
• Your iPod/iPhone must have 50 MB free
space, which is required for transferring a
tagged PSD.
• You cannot change the source during the
transferring process.
While transferring the tagged PSDs, the “TAG”
indicator flashes.
TRANS 02/15
“COMPLETED” appears when all tagged PSDs
are transferred to the iPod/iPhone.
You cannot transfer the tagged PSDs to the
iPod/iPhone in the following cases:
• When the connected iPod/iPhone is not
compatible with iTunes Tagging.
• When the memory of the iPod/iPhone is full.
• When disconnecting the iPod/iPhone during
data transfer.
STEP 3: Purchasing songs from iTunes
Store
• iTunes 7.4 or later version is required to
purchase the tagged songs.
• For details about iPod/iPhone and iTunes, refer
also to the instructions supplied with the iPod/
iPhone or visit .
1 Connect the iPod/iPhone to the PC.
2 Synchronize the iPod/iPhone to the
iTunes.
The tagged PSDs are transferred to PC, and
iTunes displays the list of the tagged songs.
After the data transfer is completed, the
stored PSDs are automatically deleted from
the iPod/iPhone.
Warning messages for iTunes Tagging
• MEMORY FULL : You are trying to store the
61st PSD. Transfer the tagged PSDs to the
iPod/iPhone, or clear all tagged PSDs.
• TAG ALREADY SAVED : You are trying
to tag the song for the 2nd time while
receiving one song.
• NO TAG DATA : The broadcast currently
received does not support the iTunes
Tagging or the broadcast does not provide
PSD.
• CAN’T TRANS IPOD FULL : The memory of
the iPod/iPhone is full.
• UNSUPPORTED DEVICE FOR TAGGING :
The connected iPod/iPhone is not
compatible with iTunes Tagging.
• TRANS ERROR : The iPod/iPhone is
disconnected during data transfer.
• TRANS OFF : Data transfer is canceled.
Lights up while receiving
a song with PSD.
Number of PSDs transferred to the iPod/
iPhone / Number of PSDs stored on the unit
EN02-23_KD-AHD79[J]f.indd 10 EN02-23_KD-AHD79[J]f.indd 10 11/22/10 4:59:48 PM 11/22/10 4:59:48 PM